[PATCH v3 05/24] ARM: dts: imx6qdl-sabrelite: remove erratum ERR006687 workaround

[Philipp Zabel]

Am Freitag, den 06.01.2017, 18:11 -0800 schrieb Steve Longerbeam:
> There is a pin conflict with GPIO_6. This pin functions as a power
> input pin to the OV5642 camera sensor, but ENET uses it as the h/w
> workaround for erratum ERR006687, to wake-up the ARM cores on normal
> RX and TX packet done events. So we need to remove the h/w workaround
> to support the OV5642. The result is that the CPUidle driver will no
> longer allow entering the deep idle states on the sabrelite.
> 
> This is a partial revert of
> 
> commit 6261c4c8f13e ("ARM: dts: imx6qdl-sabrelite: use GPIO_6 for FEC
> 			interrupt.")
> commit a28eeb43ee57 ("ARM: dts: imx6: tag boards that have the HW workaround
> 			for ERR006687")
> 
> Signed-off-by: Steve Longerbeam <steve_longerbeam at mentor.com>

Pity this has to be removed for all, Nitrogen6X should really use DT
overlays for the add-on boards / cameras.

regards
Philipp