[PATCH v3 02/24] ARM: dts: imx6qdl: Add compatible, clocks, irqs to MIPI CSI-2 node

[Philipp Zabel]

Am Freitag, den 06.01.2017, 18:11 -0800 schrieb Steve Longerbeam:
> Add to the MIPI CSI2 receiver node: compatible string, interrupt sources,
> clocks.
> 
> Signed-off-by: Steve Longerbeam <steve_longerbeam at mentor.com>
> ---
>  arch/arm/boot/dts/imx6qdl.dtsi | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
> index 53e6e63..42926e9 100644
> --- a/arch/arm/boot/dts/imx6qdl.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl.dtsi
> @@ -1125,7 +1125,14 @@
>  			};
>  
>  			mipi_csi: mipi at 021dc000 {
> +				compatible = "fsl,imx6-mipi-csi2";
>  				reg = <0x021dc000 0x4000>;
> +				interrupts = <0 100 0x04>, <0 101 0x04>;
> +				clocks = <&clks IMX6QDL_CLK_HSI_TX>,
> +					 <&clks IMX6QDL_CLK_VIDEO_27M>,
> +					 <&clks IMX6QDL_CLK_EIM_SEL>;

I think the latter should be EIM_PODF

> +				clock-names = "dphy", "cfg", "pix";

and I'm not sure dphy is the right name for this one. Is that the pll
ref input?

> +				status = "disabled";
>  			};
>  
>  			mipi_dsi: mipi at 021e0000 {

regards
Philipp