[PATCH 1/1] iommu/arm-smmu: Fix for ThunderX erratum #27704

[Tomasz Nowicki]

On 12.01.2017 07:41, Tomasz Nowicki wrote:
> On 11.01.2017 13:19, Robin Murphy wrote:
>> On 11/01/17 11:51, Tomasz Nowicki wrote:
>>> The goal of erratum #27704 workaround was to make sure that ASIDs and
>>> VMIDs
>>> are unique across all SMMU instances on affected Cavium systems.
>>>
>>> Currently, the workaround code partitions ASIDs and VMIDs by increasing
>>> global cavium_smmu_context_count which in turn becomes the base ASID
>>> and VMID
>>> value for the given SMMU instance upon the context bank initialization.
>>>
>>> For systems with multiple SMMU instances this approach implies the risk
>>> of crossing 8-bit ASID, like for CN88xx capable of 4 SMMUv2, 128
>>> context bank each:
>>> SMMU_0 (0-127 ASID RANGE)
>>> SMMU_1 (127-255 ASID RANGE)
>>> SMMU_2 (256-383 ASID RANGE) <--- crossing 8-bit ASID
>>> SMMU_3 (384-511 ASID RANGE) <--- crossing 8-bit ASID
>>
>> I could swear that at some point in the original discussion it was said
>> that the TLBs were only shared between pairs of SMMUs, so in fact 0/1
>> and 2/3 are independent of each other
>
> Indeed TLBs are only shared between pairs of SMMUs but the workaround
> makes sure ASIDs are unique across all SMMU instances so we do not have
> to bother about SMMUs probe order.
>
>  - out of interest, have you
>> managed to hit an actual problem in practice or is this patch just by
>> inspection?
>
> Except SMMU0/1 devices all other devices under other SMMUs will fail on
> guest power off/on. Since we try to invalidate tlb with 16bit ASID but
> we actually have 8 bit zero padded 16 bit entry.
>
>>
>> Of course, depending on the SMMUs to probe in the right order isn't
>> particularly robust, so it's still probably a worthwhile change.
>>
>>> Since we use 8-bit ASID now we effectively misconfigure ASID[15:8]
>>> bits for
>>> SMMU_CBn_TTBRm register. Also, we still use non-zero ASID[15:8] bits
>>> upon context invalidation. This patch adds 16-bit ASID support for
>>> stage-1
>>> AArch64 contexts for Cavium SMMUv2 model so that we use ASIDs
>>> consistently.
>>>
>>> Signed-off-by: Tomasz Nowicki <tn at semihalf.com>
>>> ---
>>>  drivers/iommu/arm-smmu.c | 4 ++++
>>>  1 file changed, 4 insertions(+)
>>>
>>> diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
>>> index a60cded..ae8f059 100644
>>> --- a/drivers/iommu/arm-smmu.c
>>> +++ b/drivers/iommu/arm-smmu.c
>>> @@ -260,6 +260,7 @@ enum arm_smmu_s2cr_privcfg {
>>>
>>>  #define TTBCR2_SEP_SHIFT        15
>>>  #define TTBCR2_SEP_UPSTREAM        (0x7 << TTBCR2_SEP_SHIFT)
>>> +#define TTBCR2_AS            (1 << 4)
>>>
>>>  #define TTBRn_ASID_SHIFT        48
>>>
>>> @@ -778,6 +779,9 @@ static void arm_smmu_init_context_bank(struct
>>> arm_smmu_domain *smmu_domain,
>>>              reg = pgtbl_cfg->arm_lpae_s1_cfg.tcr;
>>>              reg2 = pgtbl_cfg->arm_lpae_s1_cfg.tcr >> 32;
>>>              reg2 |= TTBCR2_SEP_UPSTREAM;
>>> +            if (smmu->model == CAVIUM_SMMUV2 &&
>>
>> I'd be inclined to say "smmu->version == ARM_SMMU_V2" there, rather than
>> make it Cavium-specific - we enable 16-bit VMID unconditionally where
>> supported, so I don't see any reason not to handle 16-bit ASIDs in the
>> same manner.
>
> I agree, I will enable 16-bit ASID for ARM_SMMU_V2.
>

Actually, the ARM_SMMU_CTX_FMT_AARCH64 context check is all we need here:

+			if (cfg->fmt == ARM_SMMU_CTX_FMT_AARCH64)
+				reg2 |= TTBCR2_AS;

Thanks,
Tomasz