[PATCHv5 3/8] rtc: add STM32 RTC driver

[Amelie DELAUNAY]

Hi Alexandre,

> This didn't apply cleanly, please check rtc-next. I don't think I made any mistake
> as the issue was only in Kconfig. You probably based your patches on 4.9
> instead of 4.10-rc1.
Sorry for this inconvenience. You're right, my patches were based on 4.9 to be tested on stm32f4 family.
No mistake found in your conflict resolution in Kconfig.

I'm going to send a new patch to fix warnings introduced by my driver on rtc-next.

Regards,
Amelie

> -----Original Message-----
> From: Alexandre Belloni [mailto:alexandre.belloni at free-electrons.com]
> Sent: vendredi 13 janvier 2017 01:39
> To: Amelie DELAUNAY <amelie.delaunay at st.com>
> Cc: Alessandro Zummo <a.zummo at towertech.it>; Rob Herring
> <robh+dt at kernel.org>; Mark Rutland <mark.rutland at arm.com>; Maxime
> Coquelin <mcoquelin.stm32 at gmail.com>; Alexandre TORGUE
> <alexandre.torgue at st.com>; Russell King <linux at armlinux.org.uk>; rtc-
> linux at googlegroups.com; devicetree at vger.kernel.org; linux-arm-
> kernel at lists.infradead.org; linux-kernel at vger.kernel.org; Gabriel FERNANDEZ
> <gabriel.fernandez at st.com>
> Subject: Re: [PATCHv5 3/8] rtc: add STM32 RTC driver
> 
> On 11/01/2017 at 14:46:43 +0100, Amelie Delaunay wrote :
> > This patch adds support for the STM32 RTC.
> >
> > Signed-off-by: Amelie Delaunay <amelie.delaunay at st.com>
> > ---
> >  drivers/rtc/Kconfig     |  11 +
> >  drivers/rtc/Makefile    |   1 +
> >  drivers/rtc/rtc-stm32.c | 727
> > ++++++++++++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 739 insertions(+)
> >  create mode 100644 drivers/rtc/rtc-stm32.c
> >
> 
> This didn't apply cleanly, please check rtc-next. I don't think I made any mistake
> as the issue was only in Kconfig. You probably based your patches on 4.9
> instead of 4.10-rc1.
> 
> 
> --
> Alexandre Belloni, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com