[PATCH v2 5/6] arm: dts: mt2701: Add ethernet device node.
Erin Lo
erin.lo at mediatek.com
Fri Jan 13 00:42:57 PST 2017
From: Sean Wang <sean.wang at mediatek.com>
Add ethernet device node for MT2701.
Signed-off-by: Sean Wang <sean.wang at mediatek.com>
Signed-off-by: Erin Lo <erin.lo at mediatek.com>
---
arch/arm/boot/dts/mt2701-evb.dts | 40 ++++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/mt2701.dtsi | 22 ++++++++++++++++++++++
2 files changed, 62 insertions(+)
diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mt2701-evb.dts
index a483798..40abd3b 100644
--- a/arch/arm/boot/dts/mt2701-evb.dts
+++ b/arch/arm/boot/dts/mt2701-evb.dts
@@ -28,7 +28,47 @@
status = "okay";
};
+ð {
+ mac-address = [00 00 00 00 00 00];
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac1_pins>;
+ gmac1: mac at 1 {
+ compatible = "mediatek,eth-mac";
+ reg = <1>;
+ phy-handle = <&phy5>;
+ };
+
+ mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy5: ethernet-phy at 5 {
+ reg = <5>;
+ phy-mode = "rgmii-rxid";
+ };
+ };
+};
+
&pio {
+ gmac1_pins: eth at 0 {
+ pins_eth {
+ pinmux = <MT2701_PIN_275_MDC__FUNC_MDC>,
+ <MT2701_PIN_276_MDIO__FUNC_MDIO>,
+ <MT2701_PIN_262_G2_TXEN__FUNC_G2_TXEN>,
+ <MT2701_PIN_263_G2_TXD3__FUNC_G2_TXD3>,
+ <MT2701_PIN_264_G2_TXD2__FUNC_G2_TXD2>,
+ <MT2701_PIN_265_G2_TXD1__FUNC_G2_TXD1>,
+ <MT2701_PIN_266_G2_TXD0__FUNC_G2_TXD0>,
+ <MT2701_PIN_267_G2_TXC__FUNC_G2_TXC>,
+ <MT2701_PIN_268_G2_RXC__FUNC_G2_RXC>,
+ <MT2701_PIN_269_G2_RXD0__FUNC_G2_RXD0>,
+ <MT2701_PIN_270_G2_RXD1__FUNC_G2_RXD1>,
+ <MT2701_PIN_271_G2_RXD2__FUNC_G2_RXD2>,
+ <MT2701_PIN_272_G2_RXD3__FUNC_G2_RXD3>,
+ <MT2701_PIN_274_G2_RXDV__FUNC_G2_RXDV>;
+ };
+ };
+
spi_pins_a: spi0 at 0 {
pins_spi {
pinmux = <MT2701_PIN_53_SPI0_CSN__FUNC_SPI0_CS>,
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 4f52019..3847f70 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -381,6 +381,28 @@
#clock-cells = <1>;
};
+ eth: ethernet at 1b100000 {
+ compatible = "mediatek,mt7623-eth";
+ reg = <0 0x1b100000 0 0x20000>;
+ interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 199 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
+ <&apmixedsys CLK_APMIXED_TRGPLL>,
+ <ðsys CLK_ETHSYS_ESW>,
+ <ðsys CLK_ETHSYS_GP2>,
+ <ðsys CLK_ETHSYS_GP1>;
+ clock-names = "ethif", "trgpll", "esw", "gp2", "gp1";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
+ resets = <&watchdog MT2701_TOPRGU_ETHDMA_RST>;
+ reset-names = "eth";
+ mediatek,ethsys = <ðsys>;
+ mediatek,pctl = <&syscfg_pctl_a>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
bdpsys: syscon at 1c000000 {
compatible = "mediatek,mt2701-bdpsys", "syscon";
reg = <0 0x1c000000 0 0x1000>;
--
1.9.1
More information about the linux-arm-kernel
mailing list