[PATCH v3 10/24] ARM: dts: imx6-sabreauto: add pinctrl for gpt input capture

[Tim Harvey]

On Fri, Jan 6, 2017 at 6:11 PM, Steve Longerbeam <slongerbeam at gmail.com> wrote:
> Add pinctrl groups for both GPT input capture channels.
>
> Signed-off-by: Steve Longerbeam <steve_longerbeam at mentor.com>
> ---
>  arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
> index 967c3b8..495709f 100644
> --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
> @@ -457,6 +457,18 @@
>                         >;
>                 };
>
> +               pinctrl_gpt_input_capture0: gptinputcapture0grp {
> +                       fsl,pins = <
> +                               MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1       0x1b0b0
> +                       >;
> +               };
> +
> +               pinctrl_gpt_input_capture1: gptinputcapture1grp {
> +                       fsl,pins = <
> +                               MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2       0x1b0b0
> +                       >;
> +               };
> +
>                 pinctrl_spdif: spdifgrp {
>                         fsl,pins = <
>                                 MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x1b0b0
> --

Steve,

These are not used anywhere.

Tim