[PATCH v3 3/3] arm64: dts: juno: add missing CoreSight STM component
Sudeep Holla
sudeep.holla at arm.com
Thu Jan 12 07:20:10 PST 2017
From: Mike Leach <mike.leach at linaro.org>
This patch adds the missing CoreSight STM component definition to the
device tree of all the juno variants(r0,r1,r2)
STM component is connected to different funnels depending on Juno
platform variant.
Signed-off-by: Mike Leach <mike.leach at linaro.org>
[sudeep.holla at arm.com: minor changelog update and reorganising the STM
node back into juno-base.dtsi to avoid duplication]
Signed-off-by: Sudeep Holla <sudeep.holla at arm.com>
---
arch/arm64/boot/dts/arm/juno-base.dtsi | 15 +++++++++++++++
arch/arm64/boot/dts/arm/juno-r1.dts | 4 ++++
arch/arm64/boot/dts/arm/juno-r2.dts | 4 ++++
arch/arm64/boot/dts/arm/juno.dts | 16 ++++++++++++++++
4 files changed, 39 insertions(+)
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index 6d7f56573e89..77fe75de5cae 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -182,6 +182,21 @@
};
};
+ stm at 20100000 {
+ compatible = "arm,coresight-stm", "arm,primecell";
+ reg = <0 0x20100000 0 0x1000>,
+ <0 0x28000000 0 0x180000>;
+ reg-names = "stm-base", "stm-stimulus-base";
+
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ power-domains = <&scpi_devpd 0>;
+ port {
+ stm_out_port: endpoint {
+ };
+ };
+ };
+
etm0: etm at 22040000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x22040000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts
index d4b85d9d343e..6df25c7a6b90 100644
--- a/arch/arm64/boot/dts/arm/juno-r1.dts
+++ b/arch/arm64/boot/dts/arm/juno-r1.dts
@@ -236,3 +236,7 @@
&replicator_in_port0 {
remote-endpoint = <&csys2_funnel_out_port>;
};
+
+&stm_out_port {
+ remote-endpoint = <&csys1_funnel_in_port0>;
+};
diff --git a/arch/arm64/boot/dts/arm/juno-r2.dts b/arch/arm64/boot/dts/arm/juno-r2.dts
index 14b29517065c..dafe92c20f65 100644
--- a/arch/arm64/boot/dts/arm/juno-r2.dts
+++ b/arch/arm64/boot/dts/arm/juno-r2.dts
@@ -236,3 +236,7 @@
&replicator_in_port0 {
remote-endpoint = <&csys2_funnel_out_port>;
};
+
+&stm_out_port {
+ remote-endpoint = <&csys1_funnel_in_port0>;
+};
diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts
index ba10d688beaa..dbec40a4c4a7 100644
--- a/arch/arm64/boot/dts/arm/juno.dts
+++ b/arch/arm64/boot/dts/arm/juno.dts
@@ -211,3 +211,19 @@
&replicator_in_port0 {
remote-endpoint = <&etf0_out_port>;
};
+
+&stm_out_port {
+ remote-endpoint = <&main_funnel_in_port2>;
+};
+
+&main_funnel {
+ ports {
+ port at 3 {
+ reg = <2>;
+ main_funnel_in_port2: endpoint {
+ slave-mode;
+ remote-endpoint = <&stm_out_port>;
+ };
+ };
+ };
+};
--
2.7.4
More information about the linux-arm-kernel
mailing list