[PATCH net-next v2 10/10] ARM: orion: Register DSA switch as a MDIO device
Florian Fainelli
f.fainelli at gmail.com
Wed Jan 11 19:41:21 PST 2017
Utilize the ability to pass board specific MDIO bus information towards a
particular MDIO device thus allowing us to provide the per-port switch layout
to the Marvell 88E6XXX switch driver.
Since we would end-up with conflicting registration paths, do not register the
"dsa" platform device anymore.
Note that the MDIO devices registered by code in net/dsa/dsa2.c does not
parse a dsa_platform_data, but directly take a dsa_chip_data (specific
to a single switch chip), so we update the different call sites to pass
this structure down to orion_ge00_switch_init().
Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
---
arch/arm/mach-orion5x/common.c | 2 +-
arch/arm/mach-orion5x/common.h | 4 ++--
arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c | 7 +------
arch/arm/mach-orion5x/rd88f5181l-ge-setup.c | 7 +------
arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c | 7 +------
arch/arm/mach-orion5x/wnr854t-setup.c | 2 +-
arch/arm/mach-orion5x/wrt350n-v2-setup.c | 7 +------
arch/arm/plat-orion/common.c | 25 +++++++++++++++++++------
arch/arm/plat-orion/include/plat/common.h | 4 ++--
9 files changed, 29 insertions(+), 36 deletions(-)
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 04910764c385..83a7ec4c16d0 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -105,7 +105,7 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
/*****************************************************************************
* Ethernet switch
****************************************************************************/
-void __init orion5x_eth_switch_init(struct dsa_platform_data *d)
+void __init orion5x_eth_switch_init(struct dsa_chip_data *d)
{
orion_ge00_switch_init(d);
}
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index 8a4115bd441d..efeffc6b4ebb 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -3,7 +3,7 @@
#include <linux/reboot.h>
-struct dsa_platform_data;
+struct dsa_chip_data;
struct mv643xx_eth_platform_data;
struct mv_sata_platform_data;
@@ -41,7 +41,7 @@ void orion5x_setup_wins(void);
void orion5x_ehci0_init(void);
void orion5x_ehci1_init(void);
void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data);
-void orion5x_eth_switch_init(struct dsa_platform_data *d);
+void orion5x_eth_switch_init(struct dsa_chip_data *d);
void orion5x_i2c_init(void);
void orion5x_sata_init(struct mv_sata_platform_data *sata_data);
void orion5x_spi_init(void);
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index dccadf68ea2b..a3c1336d30c9 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -101,11 +101,6 @@ static struct dsa_chip_data rd88f5181l_fxo_switch_chip_data = {
.port_names[7] = "lan3",
};
-static struct dsa_platform_data __initdata rd88f5181l_fxo_switch_plat_data = {
- .nr_chips = 1,
- .chip = &rd88f5181l_fxo_switch_chip_data,
-};
-
static void __init rd88f5181l_fxo_init(void)
{
/*
@@ -120,7 +115,7 @@ static void __init rd88f5181l_fxo_init(void)
*/
orion5x_ehci0_init();
orion5x_eth_init(&rd88f5181l_fxo_eth_data);
- orion5x_eth_switch_init(&rd88f5181l_fxo_switch_plat_data);
+ orion5x_eth_switch_init(&rd88f5181l_fxo_switch_chip_data);
orion5x_uart0_init();
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index affe5ec825de..252efe29bd1a 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -102,11 +102,6 @@ static struct dsa_chip_data rd88f5181l_ge_switch_chip_data = {
.port_names[7] = "lan3",
};
-static struct dsa_platform_data __initdata rd88f5181l_ge_switch_plat_data = {
- .nr_chips = 1,
- .chip = &rd88f5181l_ge_switch_chip_data,
-};
-
static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = {
I2C_BOARD_INFO("ds1338", 0x68),
};
@@ -125,7 +120,7 @@ static void __init rd88f5181l_ge_init(void)
*/
orion5x_ehci0_init();
orion5x_eth_init(&rd88f5181l_ge_eth_data);
- orion5x_eth_switch_init(&rd88f5181l_ge_switch_plat_data);
+ orion5x_eth_switch_init(&rd88f5181l_ge_switch_chip_data);
orion5x_i2c_init();
orion5x_uart0_init();
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index 67ee8571b03c..f4f1dbe1d91d 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -40,11 +40,6 @@ static struct dsa_chip_data rd88f6183ap_ge_switch_chip_data = {
.port_names[5] = "cpu",
};
-static struct dsa_platform_data __initdata rd88f6183ap_ge_switch_plat_data = {
- .nr_chips = 1,
- .chip = &rd88f6183ap_ge_switch_chip_data,
-};
-
static struct mtd_partition rd88f6183ap_ge_partitions[] = {
{
.name = "kernel",
@@ -89,7 +84,7 @@ static void __init rd88f6183ap_ge_init(void)
*/
orion5x_ehci0_init();
orion5x_eth_init(&rd88f6183ap_ge_eth_data);
- orion5x_eth_switch_init(&rd88f6183ap_ge_switch_plat_data);
+ orion5x_eth_switch_init(&rd88f6183ap_ge_switch_chip_data);
spi_register_board_info(rd88f6183ap_ge_spi_slave_info,
ARRAY_SIZE(rd88f6183ap_ge_spi_slave_info));
orion5x_spi_init();
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 4dbcdbe1de7c..ac3376fc269f 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -124,7 +124,7 @@ static void __init wnr854t_init(void)
* Configure peripherals.
*/
orion5x_eth_init(&wnr854t_eth_data);
- orion5x_eth_switch_init(&wnr854t_switch_plat_data);
+ orion5x_eth_switch_init(&wnr854t_switch_chip_data);
orion5x_uart0_init();
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index a6a8c4648d74..9250bb2e429c 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -191,11 +191,6 @@ static struct dsa_chip_data wrt350n_v2_switch_chip_data = {
.port_names[7] = "lan4",
};
-static struct dsa_platform_data __initdata wrt350n_v2_switch_plat_data = {
- .nr_chips = 1,
- .chip = &wrt350n_v2_switch_chip_data,
-};
-
static void __init wrt350n_v2_init(void)
{
/*
@@ -210,7 +205,7 @@ static void __init wrt350n_v2_init(void)
*/
orion5x_ehci0_init();
orion5x_eth_init(&wrt350n_v2_eth_data);
- orion5x_eth_switch_init(&wrt350n_v2_switch_plat_data);
+ orion5x_eth_switch_init(&wrt350n_v2_switch_chip_data);
orion5x_uart0_init();
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index 272f49b2c68f..989f3ccfcdc7 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -22,6 +22,7 @@
#include <linux/platform_data/dma-mv_xor.h>
#include <linux/platform_data/usb-ehci-orion.h>
#include <plat/common.h>
+#include <linux/phy.h>
/* Create a clkdev entry for a given device/clk */
void __init orion_clkdev_add(const char *con_id, const char *dev_id,
@@ -470,15 +471,27 @@ void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
/*****************************************************************************
* Ethernet switch
****************************************************************************/
-void __init orion_ge00_switch_init(struct dsa_platform_data *d)
+static __initdata const char *orion_ge00_mvmdio_bus_name = "orion-mii";
+static __initdata struct mdio_board_info
+ orion_ge00_switch_board_info;
+
+void __init orion_ge00_switch_init(struct dsa_chip_data *d)
{
- int i;
+ struct mdio_board_info *bd;
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(d->port_names); i++)
+ if (!strcmp(d->port_names[i], "cpu"))
+ break;
- d->netdev = &orion_ge00.dev;
- for (i = 0; i < d->nr_chips; i++)
- d->chip[i].host_dev = &orion_ge_mvmdio.dev;
+ bd = &orion_ge00_switch_board_info;
+ bd->bus_id = orion_ge00_mvmdio_bus_name;
+ bd->mdio_addr = d->sw_addr;
+ d->netdev[i] = &orion_ge00.dev;
+ strcpy(bd->modalias, "mv88e6085");
+ bd->platform_data = d;
- platform_device_register_data(NULL, "dsa", 0, d, sizeof(d));
+ mdiobus_register_board_info(&orion_ge00_switch_board_info, 1);
}
/*****************************************************************************
diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h
index 9347f3c58a6d..3647d3b33c20 100644
--- a/arch/arm/plat-orion/include/plat/common.h
+++ b/arch/arm/plat-orion/include/plat/common.h
@@ -12,7 +12,7 @@
#include <linux/mv643xx_eth.h>
#include <linux/platform_data/usb-ehci-orion.h>
-struct dsa_platform_data;
+struct dsa_chip_data;
struct mv_sata_platform_data;
void __init orion_uart0_init(void __iomem *membase,
@@ -57,7 +57,7 @@ void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
unsigned long mapbase,
unsigned long irq);
-void __init orion_ge00_switch_init(struct dsa_platform_data *d);
+void __init orion_ge00_switch_init(struct dsa_chip_data *d);
void __init orion_i2c_init(unsigned long mapbase,
unsigned long irq,
--
2.9.3
More information about the linux-arm-kernel
mailing list