[PATCH] arm64: dts: exynos: Replace small letter of base address/offset on Exynos5433

[Chanwoo Choi]

2017-01-12 6:15 GMT+09:00 Rob Herring <robh at kernel.org>:
> On Wed, Jan 11, 2017 at 09:55:48AM +0900, Chanwoo Choi wrote:
>> This patch replaces the small letter of base address, offset and hex value
>> with the capital letter to keep the consistency on Exynos5433.
>
> You mean the other way around, right?

When I posted the dts patches, I got the comment that small letter is better
for base address/offset. (It doesn’t mean that all dts file in Linux Kernel
have to use the small letter of base address and offset.)

This dts uses the both capital and small letter for each base address/offset.
Almost hex value already uses the small letter. If possible, I hope to use
the one style (small letter).

>
>>
>> Signed-off-by: Chanwoo Choi <cw00.choi at samsung.com>
>> ---
>>  arch/arm64/boot/dts/exynos/exynos5433.dtsi | 14 +++++++-------
>>  1 file changed, 7 insertions(+), 7 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
>> index abaf6b4d599d..d7ed1a68b6fd 100644
>> --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
>> +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
>> @@ -231,7 +231,7 @@
>>               compatible = "arm,psci";
>>               method = "smc";
>>               cpu_off = <0x84000002>;
>> -             cpu_on = <0xC4000003>;
>> +             cpu_on = <0xc4000003>;
>>       };
>>
>>       reboot: syscon-reboot {
>> @@ -753,7 +753,7 @@
>>
>>               dsi: dsi at 13900000 {
>>                       compatible = "samsung,exynos5433-mipi-dsi";
>> -                     reg = <0x13900000 0xC0>;
>> +                     reg = <0x13900000 0xc0>;
>>                       interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
>>                       phys = <&mipi_phy 1>;
>>                       phy-names = "dsim";
>> @@ -880,9 +880,9 @@
>>                       iommus = <&sysmmu_jpeg>;
>>               };
>>
>> -             mfc: codec at 152E0000 {
>> +             mfc: codec at 152e0000 {
>>                       compatible = "samsung,exynos5433-mfc";
>> -                     reg = <0x152E0000 0x10000>;
>> +                     reg = <0x152e0000 0x10000>;
>>                       interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
>>                       clock-names = "pclk", "aclk", "aclk_xiu";
>>                       clocks = <&cmu_mfc CLK_PCLK_MFC>,
>> @@ -914,7 +914,7 @@
>>
>>               sysmmu_gscl0: sysmmu at 13c80000 {
>>                       compatible = "samsung,exynos-sysmmu";
>> -                     reg = <0x13C80000 0x1000>;
>> +                     reg = <0x13c80000 0x1000>;
>>                       interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
>>                       clock-names = "aclk", "pclk";
>>                       clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL0>,
>> @@ -924,7 +924,7 @@
>>
>>               sysmmu_gscl1: sysmmu at 13c90000 {
>>                       compatible = "samsung,exynos-sysmmu";
>> -                     reg = <0x13C90000 0x1000>;
>> +                     reg = <0x13c90000 0x1000>;
>>                       interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
>>                       clock-names = "aclk", "pclk";
>>                       clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL1>,
>> @@ -934,7 +934,7 @@
>>
>>               sysmmu_gscl2: sysmmu at 13ca0000 {
>>                       compatible = "samsung,exynos-sysmmu";
>> -                     reg = <0x13CA0000 0x1000>;
>> +                     reg = <0x13ca0000 0x1000>;
>>                       interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
>>                       clock-names = "aclk", "pclk";
>>                       clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL2>,
>> --
>> 1.9.1
>>



-- 
Best Regards,
Chanwoo Choi
Samsung Electronics