[RESEND PATCH v5] arm64: dts: qcom: Add msm8916 CoreSight components

Georgi Djakov georgi.djakov at linaro.org
Wed Jan 11 07:59:11 PST 2017


From: "Ivan T. Ivanov" <ivan.ivanov at linaro.org>

Add initial set of CoreSight components found on Qualcomm msm8916 and
apq8016 based platforms, including the DragonBoard 410c board.

Signed-off-by: Ivan T. Ivanov <ivan.ivanov at linaro.org>
Acked-by: Mathieu Poirier <mathieu.poirier at linaro.org>
Signed-off-by: Georgi Djakov <georgi.djakov at linaro.org>
---

Changes since v4: (https://lkml.org/lkml/2016/11/17/533)
 * Move everything into the SoC dtsi file as suggested by Stephen Boyd.
 * Updated commit message.
 * Got Ack from Mathieu.

Changes since v3: (https://lkml.org/lkml/2015/5/11/134)
 * Include msm8916-coresight.dtsi into msm8916.dtsi

Changes since v2: (https://lkml.org/lkml/2015/4/29/242)
 * Added "1x" to "qcom,coresight-replicator" compatible string, to match what
   devicetree bindings documentations says.

 arch/arm64/boot/dts/qcom/msm8916.dtsi | 241 ++++++++++++++++++++++++++++++++++
 1 file changed, 241 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index f8ff327667c5..014d76e7dddf 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -14,6 +14,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-msm8916.h>
 #include <dt-bindings/reset/qcom,gcc-msm8916.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
 
 / {
 	model = "Qualcomm Technologies, Inc. MSM8916";
@@ -856,6 +857,246 @@
 				memory-region = <&mpss_mem>;
 			};
 		};
+
+		tpiu at 820000 {
+			compatible = "arm,coresight-tpiu", "arm,primecell";
+			reg = <0x820000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			port {
+				tpiu_in: endpoint {
+					slave-mode;
+					remote-endpoint = <&replicator_out1>;
+				};
+			};
+		};
+
+		funnel at 821000 {
+			compatible = "arm,coresight-funnel", "arm,primecell";
+			reg = <0x821000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/*
+				 * Not described input ports:
+				 * 0 - connected to Resource and Power Manger CPU ETM
+				 * 1 - not-connected
+				 * 2 - connected to Modem CPU ETM
+				 * 3 - not-connected
+				 * 5 - not-connected
+				 * 6 - connected trought funnel to Wireless CPU ETM
+				 * 7 - connected to STM component
+				 */
+
+				port at 4 {
+					reg = <4>;
+					funnel0_in4: endpoint {
+						slave-mode;
+						remote-endpoint = <&funnel1_out>;
+					};
+				};
+				port at 8 {
+					reg = <0>;
+					funnel0_out: endpoint {
+						remote-endpoint = <&etf_in>;
+					};
+				};
+			};
+		};
+
+		replicator at 824000 {
+			compatible = "qcom,coresight-replicator1x", "arm,primecell";
+			reg = <0x824000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port at 0 {
+					reg = <0>;
+					replicator_out0: endpoint {
+						remote-endpoint = <&etr_in>;
+					};
+				};
+				port at 1 {
+					reg = <1>;
+					replicator_out1: endpoint {
+						remote-endpoint = <&tpiu_in>;
+					};
+				};
+				port at 2 {
+					reg = <0>;
+					replicator_in: endpoint {
+						slave-mode;
+						remote-endpoint = <&etf_out>;
+					};
+				};
+			};
+		};
+
+		etf at 825000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x825000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port at 0 {
+					reg = <0>;
+					etf_out: endpoint {
+						slave-mode;
+						remote-endpoint = <&funnel0_out>;
+					};
+				};
+				port at 1 {
+					reg = <0>;
+					etf_in: endpoint {
+						remote-endpoint = <&replicator_in>;
+					};
+				};
+			};
+		};
+
+		etr at 826000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x826000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			port {
+				etr_in: endpoint {
+					slave-mode;
+					remote-endpoint = <&replicator_out0>;
+				};
+			};
+		};
+
+		funnel at 841000 {	/* APSS funnel only 4 inputs are used */
+			compatible = "arm,coresight-funnel", "arm,primecell";
+			reg = <0x841000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port at 0 {
+					reg = <0>;
+					funnel1_in0: endpoint {
+						slave-mode;
+						remote-endpoint = <&etm0_out>;
+					};
+				};
+				port at 1 {
+					reg = <1>;
+					funnel1_in1: endpoint {
+						slave-mode;
+						remote-endpoint = <&etm1_out>;
+					};
+				};
+				port at 2 {
+					reg = <2>;
+					funnel1_in2: endpoint {
+						slave-mode;
+						remote-endpoint = <&etm2_out>;
+					};
+				};
+				port at 3 {
+					reg = <3>;
+					funnel1_in3: endpoint {
+						slave-mode;
+						remote-endpoint = <&etm3_out>;
+					};
+				};
+				port at 4 {
+					reg = <0>;
+					funnel1_out: endpoint {
+						remote-endpoint = <&funnel0_in4>;
+					};
+				};
+			};
+		};
+
+		etm at 85c000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x85c000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU0>;
+
+			port {
+				etm0_out: endpoint {
+				remote-endpoint = <&funnel1_in0>;
+				};
+			};
+		};
+
+		etm at 85d000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x85d000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU1>;
+
+			port {
+				etm1_out: endpoint {
+					remote-endpoint = <&funnel1_in1>;
+				};
+			};
+		};
+
+		etm at 85e000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x85e000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU2>;
+
+			port {
+				etm2_out: endpoint {
+					remote-endpoint = <&funnel1_in2>;
+				};
+			};
+		};
+
+		etm at 85f000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x85f000 0x1000>;
+
+			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+			clock-names = "apb_pclk", "atclk";
+
+			cpu = <&CPU3>;
+
+			port {
+				etm3_out: endpoint {
+					remote-endpoint = <&funnel1_in3>;
+				};
+			};
+		};
 	};
 
 	smd {



More information about the linux-arm-kernel mailing list