[PATCH v2 2/2] media: rc: add driver for IR remote receiver on MT7623 SoC

sean.wang at mediatek.com sean.wang at mediatek.com
Tue Jan 10 01:13:51 PST 2017


From: Sean Wang <sean.wang at mediatek.com>

This patch adds driver for IR controller on MT7623 SoC.
and should also work on similar Mediatek SoC. Currently
testing successfully on NEC and SONY remote controller
only but it should work on others (lirc, rc-5 and rc-6).

Signed-off-by: Sean Wang <sean.wang at mediatek.com>
Reviewed-by: Sean Young <sean at mess.org>
---
 drivers/media/rc/Kconfig   |  11 ++
 drivers/media/rc/Makefile  |   1 +
 drivers/media/rc/mtk-cir.c | 326 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 338 insertions(+)
 create mode 100644 drivers/media/rc/mtk-cir.c

diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
index 629e8ca..9228479 100644
--- a/drivers/media/rc/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -235,6 +235,17 @@ config IR_MESON
 	   To compile this driver as a module, choose M here: the
 	   module will be called meson-ir.
 
+config IR_MTK
+	tristate "Mediatek IR remote receiver"
+	depends on RC_CORE
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	---help---
+	   Say Y if you want to use the IR remote receiver available
+	   on Mediatek SoCs.
+
+	   To compile this driver as a module, choose M here: the
+	   module will be called mtk-cir.
+
 config IR_NUVOTON
 	tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
 	depends on PNP
diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
index 3a984ee..a78570b 100644
--- a/drivers/media/rc/Makefile
+++ b/drivers/media/rc/Makefile
@@ -38,3 +38,4 @@ obj-$(CONFIG_RC_ST) += st_rc.o
 obj-$(CONFIG_IR_SUNXI) += sunxi-cir.o
 obj-$(CONFIG_IR_IMG) += img-ir/
 obj-$(CONFIG_IR_SERIAL) += serial_ir.o
+obj-$(CONFIG_IR_MTK) += mtk-cir.o
diff --git a/drivers/media/rc/mtk-cir.c b/drivers/media/rc/mtk-cir.c
new file mode 100644
index 0000000..f752f63
--- /dev/null
+++ b/drivers/media/rc/mtk-cir.c
@@ -0,0 +1,326 @@
+/*
+ * Driver for Mediatek IR Receiver Controller
+ *
+ * Copyright (C) 2017 Sean Wang <sean.wang at mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/reset.h>
+#include <media/rc-core.h>
+
+#define MTK_IR_DEV KBUILD_MODNAME
+
+/* Register to enable PWM and IR */
+#define MTK_CONFIG_HIGH_REG       0x0c
+/* Enable IR pulse width detection */
+#define MTK_PWM_EN		  BIT(13)
+/* Enable IR hardware function */
+#define MTK_IR_EN		  BIT(0)
+
+/* Register to setting sample period */
+#define MTK_CONFIG_LOW_REG        0x10
+/* Field to set sample period */
+#define CHK_PERIOD		  DIV_ROUND_CLOSEST(MTK_IR_SAMPLE,  \
+						    MTK_IR_CLK_PERIOD)
+#define MTK_CHK_PERIOD            (((CHK_PERIOD) << 8) & (GENMASK(20, 8)))
+#define MTK_CHK_PERIOD_MASK	  (GENMASK(20, 8))
+
+/* Register to clear state of state machine */
+#define MTK_IRCLR_REG             0x20
+/* Bit to restart IR receiving */
+#define MTK_IRCLR		  BIT(0)
+
+/* Register containing pulse width data */
+#define MTK_CHKDATA_REG(i)        (0x88 + 4 * (i))
+#define MTK_WIDTH_MASK		  (GENMASK(7, 0))
+
+/* Register to enable IR interrupt */
+#define MTK_IRINT_EN_REG          0xcc
+/* Bit to enable interrupt */
+#define MTK_IRINT_EN		  BIT(0)
+
+/* Register to ack IR interrupt */
+#define MTK_IRINT_CLR_REG         0xd0
+/* Bit to clear interrupt status */
+#define MTK_IRINT_CLR		  BIT(0)
+
+/* Maximum count of samples */
+#define MTK_MAX_SAMPLES		  0xff
+/* Indicate the end of IR message */
+#define MTK_IR_END(v, p)	  ((v) == MTK_MAX_SAMPLES && (p) == 0)
+/* Number of registers to record the pulse width */
+#define MTK_CHKDATA_SZ		  17
+/* Source clock frequency */
+#define MTK_IR_BASE_CLK		  273000000
+/* Frequency after IR internal divider */
+#define MTK_IR_CLK_FREQ		  (MTK_IR_BASE_CLK / 4)
+/* Period for MTK_IR_CLK in ns*/
+#define MTK_IR_CLK_PERIOD	  DIV_ROUND_CLOSEST(1000000000ul,  \
+						    MTK_IR_CLK_FREQ)
+/* Sample period in ns */
+#define MTK_IR_SAMPLE		  (MTK_IR_CLK_PERIOD * 0xc00)
+
+/* struct mtk_ir -	This is the main datasructure for holding the state
+ *			of the driver
+ * @dev:		The device pointer
+ * @rc:			The rc instrance
+ * @irq:		The IRQ that we are using
+ * @base:		The mapped register i/o base
+ * @clk:		The clock that we are using
+ */
+struct mtk_ir {
+	struct device	*dev;
+	struct rc_dev	*rc;
+	void __iomem	*base;
+	int		irq;
+	struct clk	*clk;
+};
+
+static void mtk_w32_mask(struct mtk_ir *ir, u32 val, u32 mask, unsigned int reg)
+{
+	u32 tmp;
+
+	tmp = __raw_readl(ir->base + reg);
+	tmp = (tmp & ~mask) | val;
+	__raw_writel(tmp, ir->base + reg);
+}
+
+static void mtk_w32(struct mtk_ir *ir, u32 val, unsigned int reg)
+{
+	__raw_writel(val, ir->base + reg);
+}
+
+static u32 mtk_r32(struct mtk_ir *ir, unsigned int reg)
+{
+	return __raw_readl(ir->base + reg);
+}
+
+static inline void mtk_irq_disable(struct mtk_ir *ir, u32 mask)
+{
+	u32 val;
+
+	val = mtk_r32(ir, MTK_IRINT_EN_REG);
+	mtk_w32(ir, val & ~mask, MTK_IRINT_EN_REG);
+}
+
+static inline void mtk_irq_enable(struct mtk_ir *ir, u32 mask)
+{
+	u32 val;
+
+	val = mtk_r32(ir, MTK_IRINT_EN_REG);
+	mtk_w32(ir, val | mask, MTK_IRINT_EN_REG);
+}
+
+static irqreturn_t mtk_ir_irq(int irqno, void *dev_id)
+{
+	struct mtk_ir *ir = dev_id;
+	u8  wid = 0;
+	u32 i, j, val;
+	DEFINE_IR_RAW_EVENT(rawir);
+
+	mtk_irq_disable(ir, MTK_IRINT_EN);
+
+	/* Reset decoder state machine */
+	ir_raw_event_reset(ir->rc);
+
+	/* First message must be pulse */
+	rawir.pulse = false;
+
+	/* Handle all pulse and space IR controller captures */
+	for (i = 0 ; i < MTK_CHKDATA_SZ ; i++) {
+		val = mtk_r32(ir, MTK_CHKDATA_REG(i));
+		dev_dbg(ir->dev, "@reg%d=0x%08x\n", i, val);
+
+		for (j = 0 ; j < 4 ; j++) {
+			wid = (val & (MTK_WIDTH_MASK << j * 8)) >> j * 8;
+			rawir.pulse = !rawir.pulse;
+			rawir.duration = wid * (MTK_IR_SAMPLE + 1);
+			ir_raw_event_store_with_filter(ir->rc, &rawir);
+		}
+	}
+
+	/* The maximum number of edges the IR controller can
+	 * hold is MTK_CHKDATA_SZ * 4. So if received IR messages
+	 * is over the limit, the last incomplete IR message would
+	 * be appended trailing space and still would be sent into
+	 * ir-rc-raw to decode. That helps it is possible that it
+	 * has enough information to decode a scancode even if the
+	 * trailing end of the message is missing.
+	 */
+	if (!MTK_IR_END(wid, rawir.pulse)) {
+		rawir.pulse = false;
+		rawir.duration = MTK_MAX_SAMPLES * (MTK_IR_SAMPLE + 1);
+		ir_raw_event_store_with_filter(ir->rc, &rawir);
+	}
+
+	ir_raw_event_handle(ir->rc);
+
+	/* Restart controller for the next receive */
+	mtk_w32_mask(ir, 0x1, MTK_IRCLR, MTK_IRCLR_REG);
+
+	/* Clear interrupt status */
+	mtk_w32_mask(ir, 0x1, MTK_IRINT_CLR, MTK_IRINT_CLR_REG);
+
+	/* Enable interrupt */
+	mtk_irq_enable(ir, MTK_IRINT_EN);
+
+	return IRQ_HANDLED;
+}
+
+static int mtk_ir_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *dn = dev->of_node;
+	struct resource *res;
+	struct mtk_ir *ir;
+	u32 val;
+	int ret = 0;
+	const char *map_name;
+
+	ir = devm_kzalloc(dev, sizeof(struct mtk_ir), GFP_KERNEL);
+	if (!ir)
+		return -ENOMEM;
+
+	ir->dev = dev;
+
+	if (!of_device_is_compatible(dn, "mediatek,mt7623-cir"))
+		return -ENODEV;
+
+	ir->clk = devm_clk_get(dev, "clk");
+	if (IS_ERR(ir->clk)) {
+		dev_err(dev, "failed to get a ir clock.\n");
+		return PTR_ERR(ir->clk);
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	ir->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(ir->base)) {
+		dev_err(dev, "failed to map registers\n");
+		return PTR_ERR(ir->base);
+	}
+
+	ir->rc = devm_rc_allocate_device(dev, RC_DRIVER_IR_RAW);
+	if (!ir->rc) {
+		dev_err(dev, "failed to allocate device\n");
+		return -ENOMEM;
+	}
+
+	ir->rc->priv = ir;
+	ir->rc->input_name = MTK_IR_DEV;
+	ir->rc->input_phys = MTK_IR_DEV "/input0";
+	ir->rc->input_id.bustype = BUS_HOST;
+	ir->rc->input_id.vendor = 0x0001;
+	ir->rc->input_id.product = 0x0001;
+	ir->rc->input_id.version = 0x0001;
+	map_name = of_get_property(dn, "linux,rc-map-name", NULL);
+	ir->rc->map_name = map_name ?: RC_MAP_EMPTY;
+	ir->rc->dev.parent = dev;
+	ir->rc->driver_name = MTK_IR_DEV;
+	ir->rc->allowed_protocols = RC_BIT_ALL;
+	ir->rc->rx_resolution = MTK_IR_SAMPLE;
+	ir->rc->timeout = MTK_MAX_SAMPLES * (MTK_IR_SAMPLE + 1);
+
+	ret = devm_rc_register_device(dev, ir->rc);
+	if (ret) {
+		dev_err(dev, "failed to register rc device\n");
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, ir);
+
+	ir->irq = platform_get_irq(pdev, 0);
+	if (ir->irq < 0) {
+		dev_err(dev, "no irq resource\n");
+		return -ENODEV;
+	}
+
+	/* Enable interrupt after proper hardware
+	 * setup and IRQ handler registration
+	 */
+	if (clk_prepare_enable(ir->clk)) {
+		dev_err(dev, "try to enable ir_clk failed\n");
+		ret = -EINVAL;
+		goto exit_clkdisable_clk;
+	}
+
+	mtk_irq_disable(ir, MTK_IRINT_EN);
+
+	ret = devm_request_irq(dev, ir->irq, mtk_ir_irq, 0, MTK_IR_DEV, ir);
+	if (ret) {
+		dev_err(dev, "failed request irq\n");
+		goto exit_clkdisable_clk;
+	}
+
+	/* Enable IR and PWM */
+	val = mtk_r32(ir, MTK_CONFIG_HIGH_REG);
+	val |= MTK_PWM_EN | MTK_IR_EN;
+	mtk_w32(ir, val, MTK_CONFIG_HIGH_REG);
+
+	/* Setting sample period */
+	mtk_w32_mask(ir, MTK_CHK_PERIOD, MTK_CHK_PERIOD_MASK,
+		     MTK_CONFIG_LOW_REG);
+
+	mtk_irq_enable(ir, MTK_IRINT_EN);
+
+	dev_info(dev, "Initialized MT7623 IR driver, sample period = %luus\n",
+		 DIV_ROUND_CLOSEST(MTK_IR_SAMPLE, 1000));
+
+	return 0;
+
+exit_clkdisable_clk:
+	clk_disable_unprepare(ir->clk);
+
+	return ret;
+}
+
+static int mtk_ir_remove(struct platform_device *pdev)
+{
+	struct mtk_ir *ir = platform_get_drvdata(pdev);
+
+	/* Avoid contention between remove handler and
+	 * IRQ handler so that disabling IR interrupt and
+	 * waiting for pending IRQ handler to complete
+	 */
+	mtk_irq_disable(ir, MTK_IRINT_EN);
+	synchronize_irq(ir->irq);
+
+	clk_disable_unprepare(ir->clk);
+
+	rc_unregister_device(ir->rc);
+
+	return 0;
+}
+
+static const struct of_device_id mtk_ir_match[] = {
+	{ .compatible = "mediatek,mt7623-cir" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mtk_ir_match);
+
+static struct platform_driver mtk_ir_driver = {
+	.probe          = mtk_ir_probe,
+	.remove         = mtk_ir_remove,
+	.driver = {
+		.name = MTK_IR_DEV,
+		.of_match_table = mtk_ir_match,
+	},
+};
+
+module_platform_driver(mtk_ir_driver);
+
+MODULE_DESCRIPTION("Mediatek IR Receiver Controller Driver");
+MODULE_AUTHOR("Sean Wang <sean.wang at mediatek.com>");
+MODULE_LICENSE("GPL");
-- 
2.7.4




More information about the linux-arm-kernel mailing list