[PATCH resend v4 2/3] ARM: dts: imx6: Support Savageboard dual

[Shawn Guo]

On Wed, Jan 04, 2017 at 04:04:36PM +0900, Milo Kim wrote:
> Common savageboard DT file is used for board support.
> Add the vendor name and specify the dtb file for i.MX6Q build.
> 
> Reviewed-by: Fabio Estevam <fabio.estevam at nxp.com>
> Signed-off-by: Milo Kim <woogyom.kim at gmail.com>
> ---
>  .../devicetree/bindings/vendor-prefixes.txt        |  1 +

The bindings change should be ideally a separate patch.  But since Rob
seems to be fine with it this time, I just applied the whole series.

Shawn

>  arch/arm/boot/dts/Makefile                         |  1 +
>  arch/arm/boot/dts/imx6dl-savageboard.dts           | 51 ++++++++++++++++++++++
>  3 files changed, 53 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx6dl-savageboard.dts