[PATCH 03/22] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs
Jonathan Cameron
jic23 at kernel.org
Sat Jan 7 11:13:41 PST 2017
On 02/01/17 11:37, Quentin Schulz wrote:
> The X-Powers AXP20X and AXP22X PMICs have multiple ADCs. They expose the
> battery voltage, battery charge and discharge currents, AC-in and VBUS
> voltages and currents, 2 GPIOs muxable in ADC mode and PMIC temperature.
>
> This adds support for most of AXP20X and AXP22X ADCs.
>
> Signed-off-by: Quentin Schulz <quentin.schulz at free-electrons.com>
Couple of little bits from me. Peter got the bigger stuff.
Jonathan
> ---
> drivers/iio/adc/Kconfig | 10 +
> drivers/iio/adc/Makefile | 1 +
> drivers/iio/adc/axp20x_adc.c | 490 +++++++++++++++++++++++++++++++++++++++++++
> include/linux/mfd/axp20x.h | 4 +
> 4 files changed, 505 insertions(+)
> create mode 100644 drivers/iio/adc/axp20x_adc.c
>
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index 38bc319..5c5b51f 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -154,6 +154,16 @@ config AT91_SAMA5D2_ADC
> To compile this driver as a module, choose M here: the module will be
> called at91-sama5d2_adc.
>
> +config AXP20X_ADC
> + tristate "X-Powers AXP20X and AXP22X ADC driver"
> + depends on MFD_AXP20X
> + help
> + Say yes here to have support for X-Powers power management IC (PMIC)
> + AXP20X and AXP22X ADC devices.
> +
> + To compile this driver as a module, choose M here: the module will be
> + called axp20x_adc.
> +
> config AXP288_ADC
> tristate "X-Powers AXP288 ADC driver"
> depends on MFD_AXP20X
> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
> index d36c4be..f5c28a5 100644
> --- a/drivers/iio/adc/Makefile
> +++ b/drivers/iio/adc/Makefile
> @@ -16,6 +16,7 @@ obj-$(CONFIG_AD7887) += ad7887.o
> obj-$(CONFIG_AD799X) += ad799x.o
> obj-$(CONFIG_AT91_ADC) += at91_adc.o
> obj-$(CONFIG_AT91_SAMA5D2_ADC) += at91-sama5d2_adc.o
> +obj-$(CONFIG_AXP20X_ADC) += axp20x_adc.o
> obj-$(CONFIG_AXP288_ADC) += axp288_adc.o
> obj-$(CONFIG_BCM_IPROC_ADC) += bcm_iproc_adc.o
> obj-$(CONFIG_BERLIN2_ADC) += berlin2-adc.o
> diff --git a/drivers/iio/adc/axp20x_adc.c b/drivers/iio/adc/axp20x_adc.c
> new file mode 100644
> index 0000000..8df972a
> --- /dev/null
> +++ b/drivers/iio/adc/axp20x_adc.c
> @@ -0,0 +1,490 @@
> +/* ADC driver for AXP20X and AXP22X PMICs
> + *
> + * Copyright (c) 2016 Free Electrons NextThing Co.
> + * Quentin Schulz <quentin.schulz at free-electrons.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it under
> + * the terms of the GNU General Public License version 2 as published by the
> + * Free Software Foundation.
> + *
Pet hate : why a blank line here? ;) I'm grumpy - my flight home is delayed.
> + */
> +
> +#include <linux/completion.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regmap.h>
> +#include <linux/thermal.h>
> +
> +#include <linux/iio/iio.h>
> +#include <linux/mfd/axp20x.h>
> +
> +#define AXP20X_ADC_EN1_MASK GENMASK(7, 0)
> +
> +#define AXP20X_ADC_EN2_MASK (GENMASK(3, 2) | BIT(7))
> +#define AXP22X_ADC_EN1_MASK (GENMASK(7, 5) | BIT(0))
> +#define AXP20X_ADC_EN2_TEMP_ADC BIT(7)
> +#define AXP20X_ADC_EN2_GPIO0_ADC BIT(3)
> +#define AXP20X_ADC_EN2_GPIO1_ADC BIT(2)
> +
> +#define AXP20X_GPIO10_IN_RANGE_GPIO0 BIT(0)
> +#define AXP20X_GPIO10_IN_RANGE_GPIO1 BIT(1)
> +#define AXP20X_GPIO10_IN_RANGE_GPIO0_VAL(x) ((x) & BIT(0))
> +#define AXP20X_GPIO10_IN_RANGE_GPIO1_VAL(x) (((x) & BIT(0)) << 1)
> +
> +#define AXP20X_ADC_RATE_MASK (3 << 6)
> +#define AXP20X_ADC_RATE_25HZ (0 << 6)
> +#define AXP20X_ADC_RATE_50HZ BIT(6)
> +#define AXP20X_ADC_RATE_100HZ (2 << 6)
> +#define AXP20X_ADC_RATE_200HZ (3 << 6)
> +
> +#define AXP22X_ADC_RATE_100HZ (0 << 6)
> +#define AXP22X_ADC_RATE_200HZ BIT(6)
> +#define AXP22X_ADC_RATE_400HZ (2 << 6)
> +#define AXP22X_ADC_RATE_800HZ (3 << 6)
> +
> +#define AXP20X_ADC_CHANNEL(_channel, _name, _type, _reg) \
> + { \
> + .type = _type, \
> + .indexed = 1, \
> + .channel = _channel, \
> + .address = _reg, \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
> + BIT(IIO_CHAN_INFO_SCALE), \
> + .datasheet_name = _name, \
> + }
> +
> +#define AXP20X_ADC_CHANNEL_OFFSET(_channel, _name, _type, _reg) \
> + { \
> + .type = _type, \
> + .indexed = 1, \
> + .channel = _channel, \
> + .address = _reg, \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
> + BIT(IIO_CHAN_INFO_SCALE) |\
> + BIT(IIO_CHAN_INFO_OFFSET),\
> + .datasheet_name = _name, \
> + }
> +
> +struct axp20x_adc_iio {
Why? I'm not seeing this used anywhere.
> + struct iio_dev *indio_dev;
> + struct regmap *regmap;
> +};
> +
> +enum axp20x_adc_channel {
> + AXP20X_ACIN_V = 0,
> + AXP20X_ACIN_I,
> + AXP20X_VBUS_V,
> + AXP20X_VBUS_I,
> + AXP20X_TEMP_ADC,
> + AXP20X_GPIO0_V,
> + AXP20X_GPIO1_V,
> + AXP20X_BATT_V,
> + AXP20X_BATT_CHRG_I,
> + AXP20X_BATT_DISCHRG_I,
> + AXP20X_IPSOUT_V,
> +};
> +
> +enum axp22x_adc_channel {
> + AXP22X_TEMP_ADC = 0,
> + AXP22X_BATT_V,
> + AXP22X_BATT_CHRG_I,
> + AXP22X_BATT_DISCHRG_I,
> +};
> +
> +static const struct iio_chan_spec axp20x_adc_channels[] = {
> + AXP20X_ADC_CHANNEL(AXP20X_ACIN_V, "acin_v", IIO_VOLTAGE,
> + AXP20X_ACIN_V_ADC_H),
> + AXP20X_ADC_CHANNEL(AXP20X_ACIN_I, "acin_i", IIO_CURRENT,
> + AXP20X_ACIN_I_ADC_H),
> + AXP20X_ADC_CHANNEL(AXP20X_VBUS_V, "vbus_v", IIO_VOLTAGE,
> + AXP20X_VBUS_V_ADC_H),
> + AXP20X_ADC_CHANNEL(AXP20X_VBUS_I, "vbus_i", IIO_CURRENT,
> + AXP20X_VBUS_I_ADC_H),
> + AXP20X_ADC_CHANNEL_OFFSET(AXP20X_TEMP_ADC, "temp_adc", IIO_TEMP,
> + AXP20X_TEMP_ADC_H),
> + AXP20X_ADC_CHANNEL_OFFSET(AXP20X_GPIO0_V, "gpio0_v", IIO_VOLTAGE,
> + AXP20X_GPIO0_V_ADC_H),
> + AXP20X_ADC_CHANNEL_OFFSET(AXP20X_GPIO1_V, "gpio1_v", IIO_VOLTAGE,
> + AXP20X_GPIO1_V_ADC_H),
> + AXP20X_ADC_CHANNEL(AXP20X_BATT_V, "batt_v", IIO_VOLTAGE,
> + AXP20X_BATT_V_H),
> + AXP20X_ADC_CHANNEL(AXP20X_BATT_CHRG_I, "batt_chrg_i", IIO_CURRENT,
> + AXP20X_BATT_CHRG_I_H),
> + AXP20X_ADC_CHANNEL(AXP20X_BATT_DISCHRG_I, "batt_dischrg_i", IIO_CURRENT,
> + AXP20X_BATT_DISCHRG_I_H),
> + AXP20X_ADC_CHANNEL(AXP20X_IPSOUT_V, "ipsout_v", IIO_VOLTAGE,
> + AXP20X_IPSOUT_V_HIGH_H),
> +};
> +
> +static const struct iio_chan_spec axp22x_adc_channels[] = {
> + AXP20X_ADC_CHANNEL_OFFSET(AXP22X_TEMP_ADC, "temp_adc", IIO_TEMP,
> + AXP22X_TEMP_ADC_H),
> + AXP20X_ADC_CHANNEL(AXP22X_BATT_V, "batt_v", IIO_VOLTAGE,
> + AXP20X_BATT_V_H),
> + AXP20X_ADC_CHANNEL(AXP22X_BATT_CHRG_I, "batt_chrg_i", IIO_CURRENT,
> + AXP20X_BATT_CHRG_I_H),
> + AXP20X_ADC_CHANNEL(AXP22X_BATT_DISCHRG_I, "batt_dischrg_i", IIO_CURRENT,
> + AXP20X_BATT_DISCHRG_I_H),
> +};
> +
> +static int axp20x_adc_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *channel, int *val,
> + int *val2)
> +{
> + struct axp20x_adc_iio *info = iio_priv(indio_dev);
> + int size = 12, ret;
> +
> + switch (channel->channel) {
> + case AXP20X_BATT_DISCHRG_I:
> + size = 13;
> + case AXP20X_ACIN_V:
> + case AXP20X_ACIN_I:
> + case AXP20X_VBUS_V:
> + case AXP20X_VBUS_I:
> + case AXP20X_TEMP_ADC:
> + case AXP20X_BATT_V:
> + case AXP20X_BATT_CHRG_I:
> + case AXP20X_IPSOUT_V:
> + case AXP20X_GPIO0_V:
> + case AXP20X_GPIO1_V:
> + ret = axp20x_read_variable_width(info->regmap, channel->address,
> + size);
> + if (ret < 0)
> + return ret;
> + *val = ret;
> + return IIO_VAL_INT;
> +
> + default:
> + return -EINVAL;
> + }
> +
> + return -EINVAL;
> +}
> +
> +static int axp22x_adc_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *channel, int *val,
> + int *val2)
> +{
> + struct axp20x_adc_iio *info = iio_priv(indio_dev);
> + int size = 12, ret;
> +
> + switch (channel->channel) {
> + case AXP22X_BATT_DISCHRG_I:
> + size = 13;
> + case AXP22X_TEMP_ADC:
> + case AXP22X_BATT_V:
> + case AXP22X_BATT_CHRG_I:
> + ret = axp20x_read_variable_width(info->regmap, channel->address,
> + size);
> + if (ret < 0)
> + return ret;
> + *val = ret;
> + return IIO_VAL_INT;
> +
> + default:
> + return -EINVAL;
> + }
> +
> + return -EINVAL;
> +}
> +
> +static int axp20x_adc_scale(int channel, int *val, int *val2)
> +{
> + switch (channel) {
> + case AXP20X_ACIN_V:
> + case AXP20X_VBUS_V:
> + *val = 1;
> + *val2 = 700000;
> + return IIO_VAL_INT_PLUS_MICRO;
> +
> + case AXP20X_ACIN_I:
> + *val = 0;
> + *val2 = 625000;
> + return IIO_VAL_INT_PLUS_MICRO;
> +
> + case AXP20X_VBUS_I:
> + *val = 0;
> + *val2 = 375000;
> + return IIO_VAL_INT_PLUS_MICRO;
> +
> + case AXP20X_TEMP_ADC:
> + *val = 100;
> + return IIO_VAL_INT;
> +
> + case AXP20X_GPIO0_V:
> + case AXP20X_GPIO1_V:
> + *val = 0;
> + *val2 = 500000;
> + return IIO_VAL_INT_PLUS_MICRO;
> +
> + case AXP20X_BATT_V:
> + *val = 1;
> + *val2 = 100000;
> + return IIO_VAL_INT_PLUS_MICRO;
> +
> + case AXP20X_BATT_DISCHRG_I:
> + case AXP20X_BATT_CHRG_I:
> + *val = 0;
> + *val2 = 500000;
> + return IIO_VAL_INT_PLUS_MICRO;
> +
> + case AXP20X_IPSOUT_V:
> + *val = 1;
> + *val2 = 400000;
> + return IIO_VAL_INT_PLUS_MICRO;
> +
> + default:
> + return -EINVAL;
> + }
> +
> + return -EINVAL;
> +}
> +
> +static int axp22x_adc_scale(int channel, int *val, int *val2)
> +{
> + switch (channel) {
> + case AXP22X_TEMP_ADC:
> + *val = 100;
> + return IIO_VAL_INT;
> +
> + case AXP22X_BATT_V:
> + *val = 1;
> + *val2 = 100000;
> + return IIO_VAL_INT_PLUS_MICRO;
> +
> + case AXP22X_BATT_DISCHRG_I:
> + case AXP22X_BATT_CHRG_I:
> + *val = 0;
> + *val2 = 500000;
> + return IIO_VAL_INT_PLUS_MICRO;
> +
> + default:
> + return -EINVAL;
> + }
> +
> + return -EINVAL;
> +}
> +
> +static int axp20x_adc_offset(struct iio_dev *indio_dev, int channel, int *val)
> +{
> + struct axp20x_adc_iio *info = iio_priv(indio_dev);
> + int ret, reg;
> +
> + switch (channel) {
> + case AXP20X_TEMP_ADC:
> + *val = -1447;
> + return IIO_VAL_INT;
> +
> + case AXP20X_GPIO0_V:
> + case AXP20X_GPIO1_V:
> + ret = regmap_read(info->regmap, AXP20X_GPIO10_IN_RANGE, ®);
> + if (ret < 0)
> + return ret;
> +
> + if (channel == AXP20X_GPIO0_V)
> + *val = reg & AXP20X_GPIO10_IN_RANGE_GPIO0;
> + else
> + *val = reg & AXP20X_GPIO10_IN_RANGE_GPIO1;
> +
> + *val = !!(*val) * 700000;
> +
> + return IIO_VAL_INT;
> +
> + default:
> + return -EINVAL;
> + }
> +
> + return -EINVAL;
> +}
> +
> +static int axp20x_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan, int *val,
> + int *val2, long mask)
> +{
> + switch (mask) {
> + case IIO_CHAN_INFO_OFFSET:
> + return axp20x_adc_offset(indio_dev, chan->channel, val);
> +
> + case IIO_CHAN_INFO_SCALE:
> + return axp20x_adc_scale(chan->channel, val, val2);
> +
> + case IIO_CHAN_INFO_RAW:
> + return axp20x_adc_read_raw(indio_dev, chan, val, val2);
> +
> + default:
> + return -EINVAL;
> + }
> +
> + return -EINVAL;
> +}
> +
> +static int axp22x_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan, int *val,
> + int *val2, long mask)
> +{
> + switch (mask) {
> + case IIO_CHAN_INFO_OFFSET:
> + *val = -2667;
> + return IIO_VAL_INT;
> +
> + case IIO_CHAN_INFO_SCALE:
> + return axp22x_adc_scale(chan->channel, val, val2);
> +
> + case IIO_CHAN_INFO_RAW:
> + return axp22x_adc_read_raw(indio_dev, chan, val, val2);
> +
> + default:
> + return -EINVAL;
> + }
> +
> + return -EINVAL;
> +}
> +
> +static int axp20x_write_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan, int val, int val2,
> + long mask)
> +{
> + struct axp20x_adc_iio *info = iio_priv(indio_dev);
> +
> + /*
> + * The AXP20X PMIC allows the user to choose between 0V and 0.7V offsets
> + * for (independently) GPIO0 and GPIO1 when in ADC mode.
> + */
> + if (mask != IIO_CHAN_INFO_OFFSET)
> + return -EINVAL;
> +
> + if (chan->channel != AXP20X_GPIO0_V && chan->channel != AXP20X_GPIO1_V)
> + return -EINVAL;
> +
> + if (val != 0 && val != 700000)
> + return -EINVAL;
> +
> + if (chan->channel == AXP20X_GPIO0_V)
> + return regmap_update_bits(info->regmap, AXP20X_GPIO10_IN_RANGE,
> + AXP20X_GPIO10_IN_RANGE_GPIO0,
> + AXP20X_GPIO10_IN_RANGE_GPIO0_VAL(!!val));
> +
> + return regmap_update_bits(info->regmap, AXP20X_GPIO10_IN_RANGE,
> + AXP20X_GPIO10_IN_RANGE_GPIO1,
> + AXP20X_GPIO10_IN_RANGE_GPIO1_VAL(!!val));
> +}
> +
> +static const struct iio_info axp20x_adc_iio_info = {
> + .read_raw = axp20x_read_raw,
> + .write_raw = axp20x_write_raw,
> + .driver_module = THIS_MODULE,
> +};
> +
> +static const struct iio_info axp22x_adc_iio_info = {
> + .read_raw = axp22x_read_raw,
> + .driver_module = THIS_MODULE,
> +};
> +
> +static const struct of_device_id axp20x_adc_of_match[] = {
> + { .compatible = "x-powers,axp209-adc", .data = (void *)AXP209_ID, },
> + { .compatible = "x-powers,axp221-adc", .data = (void *)AXP221_ID, },
> + { /* sentinel */ },
> +};
> +
> +static int axp20x_probe(struct platform_device *pdev)
> +{
> + struct axp20x_adc_iio *info;
> + struct iio_dev *indio_dev;
> + struct axp20x_dev *axp20x_dev;
> + int ret, axp20x_id;
> +
> + axp20x_dev = dev_get_drvdata(pdev->dev.parent);
> +
> + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + info = iio_priv(indio_dev);
> + platform_set_drvdata(pdev, indio_dev);
> +
> + info->regmap = axp20x_dev->regmap;
> + info->indio_dev = indio_dev;
> + indio_dev->name = dev_name(&pdev->dev);
> + indio_dev->dev.parent = &pdev->dev;
> + indio_dev->dev.of_node = pdev->dev.of_node;
> + indio_dev->modes = INDIO_DIRECT_MODE;
> +
> + axp20x_id = (int)of_device_get_match_data(&pdev->dev);
> +
> + switch (axp20x_id) {
> + case AXP209_ID:
> + indio_dev->info = &axp20x_adc_iio_info;
> + indio_dev->num_channels = ARRAY_SIZE(axp20x_adc_channels);
> + indio_dev->channels = axp20x_adc_channels;
> +
> + /* Enable the ADCs on IP */
> + regmap_write(info->regmap, AXP20X_ADC_EN1, AXP20X_ADC_EN1_MASK);
> +
> + /* Enable GPIO0/1 and internal temperature ADCs */
> + regmap_update_bits(info->regmap, AXP20X_ADC_EN2,
> + AXP20X_ADC_EN2_MASK, AXP20X_ADC_EN2_MASK);
> +
> + /* Configure ADCs rate */
> + regmap_update_bits(info->regmap, AXP20X_ADC_RATE,
> + AXP20X_ADC_RATE_MASK, AXP20X_ADC_RATE_50HZ);
> + break;
> +
> + case AXP221_ID:
> + indio_dev->info = &axp22x_adc_iio_info;
> + indio_dev->num_channels = ARRAY_SIZE(axp22x_adc_channels);
> + indio_dev->channels = axp22x_adc_channels;
> +
> + /* Enable the ADCs on IP */
> + regmap_write(info->regmap, AXP20X_ADC_EN1, AXP22X_ADC_EN1_MASK);
> +
> + /* Configure ADCs rate */
> + regmap_update_bits(info->regmap, AXP20X_ADC_RATE,
> + AXP20X_ADC_RATE_MASK, AXP22X_ADC_RATE_200HZ);
> + break;
> +
> + default:
> + return -EINVAL;
> + }
> +
> + ret = devm_iio_device_register(&pdev->dev, indio_dev);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "could not register the device\n");
> + regmap_write(info->regmap, AXP20X_ADC_EN1, 0);
> + regmap_write(info->regmap, AXP20X_ADC_EN2, 0);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int axp20x_remove(struct platform_device *pdev)
> +{
> + struct axp20x_adc_iio *info;
> + struct iio_dev *indio_dev = platform_get_drvdata(pdev);
> +
> + info = iio_priv(indio_dev);
> + regmap_write(info->regmap, AXP20X_ADC_EN1, 0);
> + regmap_write(info->regmap, AXP20X_ADC_EN2, 0);
> +
> + return 0;
> +}
> +
> +static struct platform_driver axp20x_adc_driver = {
> + .driver = {
> + .name = "axp20x-adc",
> + .of_match_table = axp20x_adc_of_match,
> + },
> + .probe = axp20x_probe,
> + .remove = axp20x_remove,
> +};
> +
> +module_platform_driver(axp20x_adc_driver);
> +
> +MODULE_DESCRIPTION("ADC driver for AXP20X and AXP22X PMICs");
> +MODULE_AUTHOR("Quentin Schulz <quentin.schulz at free-electrons.com>");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
> index a4860bc..650c6f6 100644
> --- a/include/linux/mfd/axp20x.h
> +++ b/include/linux/mfd/axp20x.h
> @@ -150,6 +150,10 @@ enum {
> #define AXP20X_VBUS_I_ADC_L 0x5d
> #define AXP20X_TEMP_ADC_H 0x5e
> #define AXP20X_TEMP_ADC_L 0x5f
> +
> +#define AXP22X_TEMP_ADC_H 0x56
> +#define AXP22X_TEMP_ADC_L 0x57
> +
> #define AXP20X_TS_IN_H 0x62
> #define AXP20X_TS_IN_L 0x63
> #define AXP20X_GPIO0_V_ADC_H 0x64
>
More information about the linux-arm-kernel
mailing list