[PATCH WIP 1/4] ARM: nommu: dynamic exception base address setting
afzal mohammed
afzal.mohd.ma at gmail.com
Sat Jan 7 09:20:42 PST 2017
No-MMU dynamic exception base address configuration on processors
with CP15.
TODO: Handle MMU case as well as ARM_MPU scenario dynamically
Signed-off-by: afzal mohammed <afzal.mohd.ma at gmail.com>
---
arch/arm/mm/nommu.c | 62 +++++++++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 60 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index 681cec879caf..e82056df0635 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <asm/cacheflush.h>
+#include <asm/cp15.h>
#include <asm/sections.h>
#include <asm/page.h>
#include <asm/setup.h>
@@ -23,6 +24,8 @@
#include "mm.h"
+unsigned long vectors_base;
+
#ifdef CONFIG_ARM_MPU
struct mpu_rgn_info mpu_rgn_info;
@@ -279,15 +282,70 @@ static void sanity_check_meminfo_mpu(void) {}
static void __init mpu_setup(void) {}
#endif /* CONFIG_ARM_MPU */
+#ifdef CONFIG_CPU_CP15
+/*
+ * ID_PRF1 bits (CP#15 ID_PFR1)
+ */
+#define ID_PFR1_SE (0x3 << 4) /* Security extension enable bits */
+
+#ifndef CONFIG_CPU_HIGH_VECTOR
+static inline unsigned long get_id_pfr1(void)
+{
+ unsigned long val;
+ asm("mrc p15, 0, %0, c0, c1, 1" : "=r" (val) : : "cc");
+ return val;
+}
+
+static inline void set_vbar(unsigned long val)
+{
+ asm("mcr p15, 0, %0, c12, c0, 0" : : "r" (val) : "cc");
+}
+
+static bool __init security_extensions_enabled(void)
+{
+ return !!(get_id_pfr1() & ID_PFR1_SE);
+}
+#endif
+
+static unsigned long __init setup_vector_base(void)
+{
+ unsigned long reg, base;
+
+ reg = get_cr();
+
+#ifdef CONFIG_CPU_HIGH_VECTOR
+ set_cr(reg | CR_V);
+ base = 0xFFFF0000;
+#else
+ set_cr(reg & ~CR_V);
+ base = 0;
+ if (security_extensions_enabled()) {
+#ifdef CONFIG_REMAP_VECTORS_TO_RAM
+ base = CONFIG_DRAM_BASE;
+#endif
+ set_vbar(base);
+ }
+#endif /* CONFIG_CPU_HIGH_VECTOR */
+
+ return base;
+}
+#endif /* CONFIG_CPU_CP15 */
+
void __init arm_mm_memblock_reserve(void)
{
#ifndef CONFIG_CPU_V7M
+
+#ifdef CONFIG_CPU_CP15
+ vectors_base = setup_vector_base();
+#else
+ vectors_base = CONFIG_VECTORS_BASE;
+#endif
/*
* Register the exception vector page.
* some architectures which the DRAM is the exception vector to trap,
* alloc_page breaks with error, although it is not NULL, but "0."
*/
- memblock_reserve(CONFIG_VECTORS_BASE, 2 * PAGE_SIZE);
+ memblock_reserve(vectors_base, 2 * PAGE_SIZE);
#else /* ifndef CONFIG_CPU_V7M */
/*
* There is no dedicated vector page on V7-M. So nothing needs to be
@@ -311,7 +369,7 @@ void __init sanity_check_meminfo(void)
*/
void __init paging_init(const struct machine_desc *mdesc)
{
- early_trap_init((void *)CONFIG_VECTORS_BASE);
+ early_trap_init((void *)vectors_base);
mpu_setup();
bootmem_init();
}
--
2.11.0
More information about the linux-arm-kernel
mailing list