[PATCH 20/25] ARM: dts: r8a7791: Use R-Car Gen 2 fallback binding for iic nodes

[Simon Horman]

Use recently added R-Car Gen 2 fallback binding for iic nodes in
DT for r8a7791 SoC.

This has no run-time effect for the current driver as the initialisation
sequence is the same for the SoC-specific binding for r8a7791 and the
fallback binding for R-Car Gen 2.

Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas at glider.be>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
 arch/arm/boot/dts/r8a7791.dtsi | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index b61700aa862e..55872fc8fa4c 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -518,7 +518,8 @@
 		/* doesn't need pinmux */
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic";
+		compatible = "renesas,iic-r8a7791", "renesas,rcar-gen2-iic",
+			     "renesas,rmobile-iic";
 		reg = <0 0xe60b0000 0 0x425>;
 		interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>;
@@ -532,7 +533,8 @@
 	i2c7: i2c at e6500000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic";
+		compatible = "renesas,iic-r8a7791", "renesas,rcar-gen2-iic",
+			     "renesas,rmobile-iic";
 		reg = <0 0xe6500000 0 0x425>;
 		interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7791_CLK_IIC0>;
@@ -546,7 +548,8 @@
 	i2c8: i2c at e6510000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic";
+		compatible = "renesas,iic-r8a7791", "renesas,rcar-gen2-iic",
+			     "renesas,rmobile-iic";
 		reg = <0 0xe6510000 0 0x425>;
 		interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7791_CLK_IIC1>;
-- 
2.7.0.rc3.207.g0ac5344