[PATCH 2/3] mtd: nand: sunxi: Stop using polling mode when waiting for long operations
Boris Brezillon
boris.brezillon at free-electrons.com
Fri Jan 6 01:42:06 PST 2017
Some operations, like read/write an entire page of data with the ECC
engine enabled, are known to take a lot of time. Use the interrupt-based
waiting mode in these situation.
Signed-off-by: Boris Brezillon <boris.brezillon at free-electrons.com>
---
drivers/mtd/nand/sunxi_nand.c | 24 ++++++++++++++++++------
1 file changed, 18 insertions(+), 6 deletions(-)
diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c
index ba78e13a3570..76449f79d4c5 100644
--- a/drivers/mtd/nand/sunxi_nand.c
+++ b/drivers/mtd/nand/sunxi_nand.c
@@ -522,6 +522,8 @@ static void sunxi_nfc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
u32 tmp;
while (len > offs) {
+ bool poll = false;
+
cnt = min(len - offs, NFC_SRAM_SIZE);
ret = sunxi_nfc_wait_cmd_fifo_empty(nfc);
@@ -532,7 +534,11 @@ static void sunxi_nfc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD;
writel(tmp, nfc->regs + NFC_REG_CMD);
- ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0);
+ /* Arbitrary limit for polling mode */
+ if (cnt < 64)
+ poll = true;
+
+ ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, poll, 0);
if (ret)
break;
@@ -555,6 +561,8 @@ static void sunxi_nfc_write_buf(struct mtd_info *mtd, const uint8_t *buf,
u32 tmp;
while (len > offs) {
+ bool poll = false;
+
cnt = min(len - offs, NFC_SRAM_SIZE);
ret = sunxi_nfc_wait_cmd_fifo_empty(nfc);
@@ -567,7 +575,11 @@ static void sunxi_nfc_write_buf(struct mtd_info *mtd, const uint8_t *buf,
NFC_ACCESS_DIR;
writel(tmp, nfc->regs + NFC_REG_CMD);
- ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0);
+ /* Arbitrary limit for polling mode */
+ if (cnt < 64)
+ poll = true;
+
+ ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, poll, 0);
if (ret)
break;
@@ -961,7 +973,7 @@ static int sunxi_nfc_hw_ecc_read_chunk(struct mtd_info *mtd,
writel(NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | NFC_ECC_OP,
nfc->regs + NFC_REG_CMD);
- ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0);
+ ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, false, 0);
sunxi_nfc_randomizer_disable(mtd);
if (ret)
return ret;
@@ -1073,7 +1085,7 @@ static int sunxi_nfc_hw_ecc_read_chunks_dma(struct mtd_info *mtd, uint8_t *buf,
writel(NFC_PAGE_OP | NFC_DATA_SWAP_METHOD | NFC_DATA_TRANS,
nfc->regs + NFC_REG_CMD);
- ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0);
+ ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, false, 0);
if (ret)
dmaengine_terminate_all(nfc->dmac);
@@ -1193,7 +1205,7 @@ static int sunxi_nfc_hw_ecc_write_chunk(struct mtd_info *mtd,
NFC_ACCESS_DIR | NFC_ECC_OP,
nfc->regs + NFC_REG_CMD);
- ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0);
+ ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, false, 0);
sunxi_nfc_randomizer_disable(mtd);
if (ret)
return ret;
@@ -1432,7 +1444,7 @@ static int sunxi_nfc_hw_ecc_write_page_dma(struct mtd_info *mtd,
NFC_DATA_TRANS | NFC_ACCESS_DIR,
nfc->regs + NFC_REG_CMD);
- ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, true, 0);
+ ret = sunxi_nfc_wait_events(nfc, NFC_CMD_INT_FLAG, false, 0);
if (ret)
dmaengine_terminate_all(nfc->dmac);
--
2.7.4
More information about the linux-arm-kernel
mailing list