[PATCH 10/12] ARM: dts: socfpga: add base fpga region and fpga bridges

[Dinh Nguyen]

On 01/05/2017 10:34 AM, Alan Tull wrote:
> On Thu, Jan 5, 2017 at 10:28 AM, Alan Tull <atull at kernel.org> wrote:
>> On Wed, Jan 4, 2017 at 6:21 PM, Dinh Nguyen <dinguyen at kernel.org> wrote:
>>> From: Alan Tull <atull at opensource.altera.com>
>>>
>>> Add h2f and lwh2f bridges.
>>> Add base FPGA Region to support DT overlays for FPGA programming.
>>> Add l3regs.
>>>
>>> Signed-off-by: Alan Tull <atull at opensource.altera.com>
>>> Signed-off-by: Dinh Nguyen <dinguyen at kernel.org>
>>> ---
>>>  arch/arm/boot/dts/socfpga.dtsi | 31 +++++++++++++++++++++++++++++++
>>>  1 file changed, 31 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
>>> index de29172..dccc281 100644
>>> --- a/arch/arm/boot/dts/socfpga.dtsi
>>> +++ b/arch/arm/boot/dts/socfpga.dtsi
>>> @@ -93,6 +93,16 @@
>>>                         };
>>>                 };
>>>
>>> +               base_fpga_region {
>>> +                       compatible = "fpga-region";
>>> +                       fpga-mgr = <&fpgamgr0>;
>>> +                       fpga-bridges = <&fpga_bridge0>, <&fpga_bridge1>;
>>
>> Hi Dinh,
>>
>> We want to get rid of the 'fpga-bridges' line.
>>
>>> +
>>> +                       #address-cells = <0x1>;
>>> +                       #size-cells = <0x1>;
>>> +                       ranges = <0 0xff200000 0x100000>;
>>
>> Should get rid of the ranges line here too.  The 'fpga-bridges' and
>> 'ranges' line can be added in the overlay.
>>
>> Alan
>>
>>> +               };
>>> +
>>>                 can0: can at ffc00000 {
>>>                         compatible = "bosch,d_can";
>>>                         reg = <0xffc00000 0x1000>;
>>> @@ -513,6 +523,22 @@
>>>                                 };
>>>                 };
>>>
>>> +               fpga_bridge0: fpga_bridge at ff400000 {
>>> +                       compatible = "altr,socfpga-lwhps2fpga-bridge";
>>> +                       reg = <0xff400000 0x100000>;
>>> +                       resets = <&rst LWHPS2FPGA_RESET>;
>>> +                       reset-names = "lwhps2fpga";
> 
> The driver doesn't need 'reset-names' here or below for fpga_bridge1.
> 

Ok, thanks for the review.

Dinh