[PATCH v6 4/5] soc: zte: pm_domains: Prepare for supporting ARMv8 zx2967 family
Shawn Guo
shawnguo at kernel.org
Wed Jan 4 23:05:11 PST 2017
On Wed, Jan 04, 2017 at 07:48:13PM +0800, Baoyou Xie wrote:
> The ARMv8 zx2967 family (296718, 296716 etc) uses different value
> for controlling the power domain on/off registers, Choose the
> value depending on the compatible.
>
> Multiple domains are prepared for the family, this patch prepares
> the common functions.
>
> Signed-off-by: Baoyou Xie <baoyou.xie at linaro.org>
> ---
> drivers/soc/Kconfig | 1 +
> drivers/soc/Makefile | 1 +
> drivers/soc/zte/Kconfig | 13 ++++
> drivers/soc/zte/Makefile | 4 +
> drivers/soc/zte/zx2967_pm_domains.c | 142 ++++++++++++++++++++++++++++++++++++
> drivers/soc/zte/zx2967_pm_domains.h | 44 +++++++++++
> 6 files changed, 205 insertions(+)
> create mode 100644 drivers/soc/zte/Kconfig
> create mode 100644 drivers/soc/zte/Makefile
> create mode 100644 drivers/soc/zte/zx2967_pm_domains.c
> create mode 100644 drivers/soc/zte/zx2967_pm_domains.h
>
> diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
> index f31bceb..f09023f 100644
> --- a/drivers/soc/Kconfig
> +++ b/drivers/soc/Kconfig
> @@ -11,5 +11,6 @@ source "drivers/soc/tegra/Kconfig"
> source "drivers/soc/ti/Kconfig"
> source "drivers/soc/ux500/Kconfig"
> source "drivers/soc/versatile/Kconfig"
> +source "drivers/soc/zte/Kconfig"
>
> endmenu
> diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
> index 50c23d0..05eae52 100644
> --- a/drivers/soc/Makefile
> +++ b/drivers/soc/Makefile
> @@ -16,3 +16,4 @@ obj-$(CONFIG_ARCH_TEGRA) += tegra/
> obj-$(CONFIG_SOC_TI) += ti/
> obj-$(CONFIG_ARCH_U8500) += ux500/
> obj-$(CONFIG_PLAT_VERSATILE) += versatile/
> +obj-$(CONFIG_ARCH_ZX) += zte/
> diff --git a/drivers/soc/zte/Kconfig b/drivers/soc/zte/Kconfig
> new file mode 100644
> index 0000000..20bde38
> --- /dev/null
> +++ b/drivers/soc/zte/Kconfig
> @@ -0,0 +1,13 @@
> +#
> +# ZTE SoC drivers
> +#
> +menuconfig SOC_ZTE
> + bool "ZTE SoC driver support"
> +
> +if SOC_ZTE
> +
> +config ZX2967_PM_DOMAINS
> + bool "ZX2967 PM domains"
> + depends on PM_GENERIC_DOMAINS
> +
> +endif
> diff --git a/drivers/soc/zte/Makefile b/drivers/soc/zte/Makefile
> new file mode 100644
> index 0000000..8a37f2f
> --- /dev/null
> +++ b/drivers/soc/zte/Makefile
> @@ -0,0 +1,4 @@
> +#
> +# ZTE SOC drivers
> +#
> +obj-$(CONFIG_ZX2967_PM_DOMAINS) += zx2967_pm_domains.o
> diff --git a/drivers/soc/zte/zx2967_pm_domains.c b/drivers/soc/zte/zx2967_pm_domains.c
> new file mode 100644
> index 0000000..f190a62
> --- /dev/null
> +++ b/drivers/soc/zte/zx2967_pm_domains.c
> @@ -0,0 +1,142 @@
> +/*
> + * Copyright (C) 2017 ZTE Ltd.
> + *
> + * Author: Baoyou Xie <baoyou.xie at linaro.org>
> + * License terms: GNU General Public License (GPL) version 2
> + */
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/of.h>
> +
> +#include "zx2967_pm_domains.h"
> +
> +#define PCU_DM_CLKEN(zpd) ((zpd)->reg_offset[REG_CLKEN])
> +#define PCU_DM_ISOEN(zpd) ((zpd)->reg_offset[REG_ISOEN])
> +#define PCU_DM_RSTEN(zpd) ((zpd)->reg_offset[REG_RSTEN])
> +#define PCU_DM_PWREN(zpd) ((zpd)->reg_offset[REG_PWREN])
> +#define PCU_DM_ACK_SYNC(zpd) ((zpd)->reg_offset[REG_ACK_SYNC])
> +
> +static void __iomem *pcubase;
> +
> +int zx2967_power_on(struct generic_pm_domain *domain)
The function is now used only in this file, so it can be static.
> +{
> + struct zx2967_pm_domain *zpd = (struct zx2967_pm_domain *)domain;
> + unsigned long loop = 1000;
> + u32 val;
> +
> + val = readl_relaxed(pcubase + PCU_DM_PWREN(zpd));
> + if (zpd->polarity == PWREN)
> + val |= BIT(zpd->bit);
> + else
> + val &= ~BIT(zpd->bit);
> + writel_relaxed(val, pcubase + PCU_DM_PWREN(zpd));
> +
> + do {
> + udelay(1);
> + val = readl_relaxed(pcubase + PCU_DM_ACK_SYNC(zpd))
> + & BIT(zpd->bit);
> + } while (--loop && !val);
> +
> + if (!loop) {
> + pr_err("Error: %s %s fail\n", __func__, domain->name);
> + return -EIO;
> + }
> +
> + val = readl_relaxed(pcubase + PCU_DM_RSTEN(zpd));
> + val |= BIT(zpd->bit);
> + writel_relaxed(val, pcubase + PCU_DM_RSTEN(zpd));
> + udelay(5);
> +
> + val = readl_relaxed(pcubase + PCU_DM_ISOEN(zpd));
> + val &= ~BIT(zpd->bit);
> + writel_relaxed(val, pcubase + PCU_DM_ISOEN(zpd));
> + udelay(5);
> +
> + val = readl_relaxed(pcubase + PCU_DM_CLKEN(zpd));
> + val |= BIT(zpd->bit);
> + writel_relaxed(val, pcubase + PCU_DM_CLKEN(zpd));
> + udelay(5);
> +
> + pr_debug("poweron %s\n", domain->name);
> +
> + return 0;
> +}
> +
> +int zx2967_power_off(struct generic_pm_domain *domain)
Ditto
Shawn
> +{
> + struct zx2967_pm_domain *zpd = (struct zx2967_pm_domain *)domain;
> + unsigned long loop = 1000;
> + u32 val;
> +
> + val = readl_relaxed(pcubase + PCU_DM_CLKEN(zpd));
> + val &= ~BIT(zpd->bit);
> + writel_relaxed(val, pcubase + PCU_DM_CLKEN(zpd));
> + udelay(5);
> +
> + val = readl_relaxed(pcubase + PCU_DM_ISOEN(zpd));
> + val |= BIT(zpd->bit);
> + writel_relaxed(val, pcubase + PCU_DM_ISOEN(zpd));
> + udelay(5);
> +
> + val = readl_relaxed(pcubase + PCU_DM_RSTEN(zpd));
> + val &= ~BIT(zpd->bit);
> + writel_relaxed(val, pcubase + PCU_DM_RSTEN(zpd));
> + udelay(5);
> +
> + val = readl_relaxed(pcubase + PCU_DM_PWREN(zpd));
> + if (zpd->polarity == PWREN)
> + val &= ~BIT(zpd->bit);
> + else
> + val |= BIT(zpd->bit);
> + writel_relaxed(val, pcubase + PCU_DM_PWREN(zpd));
> +
> + do {
> + udelay(1);
> + val = readl_relaxed(pcubase + PCU_DM_ACK_SYNC(zpd))
> + & BIT(zpd->bit);
> + } while (--loop && val);
> +
> + if (!loop) {
> + pr_err("Error: %s %s fail\n", __func__, domain->name);
> + return -EIO;
> + }
> +
> + pr_debug("poweroff %s\n", domain->name);
> +
> + return 0;
> +}
> +
> +int zx2967_pd_probe(struct platform_device *pdev,
> + struct generic_pm_domain **zx_pm_domains,
> + int domain_num)
> +{
> + struct genpd_onecell_data *genpd_data;
> + struct resource *res;
> + int i;
> +
> + genpd_data = devm_kzalloc(&pdev->dev, sizeof(*genpd_data), GFP_KERNEL);
> + if (!genpd_data)
> + return -ENOMEM;
> +
> + genpd_data->domains = zx_pm_domains;
> + genpd_data->num_domains = domain_num;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + pcubase = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(pcubase)) {
> + dev_err(&pdev->dev, "ioremap fail.\n");
> + return PTR_ERR(pcubase);
> + }
> +
> + for (i = 0; i < domain_num; ++i) {
> + zx_pm_domains[i]->power_on = zx2967_power_on;
> + zx_pm_domains[i]->power_off = zx2967_power_off;
> +
> + pm_genpd_init(zx_pm_domains[i], NULL, false);
> + }
> +
> + of_genpd_add_provider_onecell(pdev->dev.of_node, genpd_data);
> + dev_info(&pdev->dev, "powerdomain init ok\n");
> + return 0;
> +}
> diff --git a/drivers/soc/zte/zx2967_pm_domains.h b/drivers/soc/zte/zx2967_pm_domains.h
> new file mode 100644
> index 0000000..cb46595
> --- /dev/null
> +++ b/drivers/soc/zte/zx2967_pm_domains.h
> @@ -0,0 +1,44 @@
> +/*
> + * Header for ZTE's Power Domain Driver support
> + *
> + * Copyright (C) 2017 ZTE Ltd.
> + *
> + * Author: Baoyou Xie <baoyou.xie at linaro.org>
> + * License terms: GNU General Public License (GPL) version 2
> + */
> +
> +#ifndef __ZTE_ZX2967_PM_DOMAIN_H
> +#define __ZTE_ZX2967_PM_DOMAIN_H
> +
> +#include <linux/platform_device.h>
> +#include <linux/pm_domain.h>
> +
> +enum {
> + REG_CLKEN,
> + REG_ISOEN,
> + REG_RSTEN,
> + REG_PWREN,
> + REG_PWRDN,
> + REG_ACK_SYNC,
> +
> + /* The size of the array - must be last */
> + REG_ARRAY_SIZE,
> +};
> +
> +enum zx2967_power_polarity {
> + PWREN,
> + PWRDN,
> +};
> +
> +struct zx2967_pm_domain {
> + struct generic_pm_domain dm;
> + const u16 bit;
> + const enum zx2967_power_polarity polarity;
> + const u16 *reg_offset;
> +};
> +
> +int zx2967_pd_probe(struct platform_device *pdev,
> + struct generic_pm_domain **zx_pm_domains,
> + int domain_num);
> +
> +#endif /* __ZTE_ZX2967_PM_DOMAIN_H */
> --
> 2.7.4
>
More information about the linux-arm-kernel
mailing list