[PATCH v6 1/5] dt-bindings: zte: documents zx2967 power domain driver bindings

[Rob Herring]

On Wed, Jan 04, 2017 at 07:48:10PM +0800, Baoyou Xie wrote:
> This patch documents devicetree tree bindings for the ZTE zx2967
> power domain driver.
> 
> Signed-off-by: Baoyou Xie <baoyou.xie at linaro.org>
> ---
>  Documentation/devicetree/bindings/soc/zte/pd-2967xx.txt | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/zte/pd-2967xx.txt
> 
> diff --git a/Documentation/devicetree/bindings/soc/zte/pd-2967xx.txt b/Documentation/devicetree/bindings/soc/zte/pd-2967xx.txt
> new file mode 100644
> index 0000000..1476318
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/zte/pd-2967xx.txt
> @@ -0,0 +1,17 @@
> +* ZTE 2967 SoC Power Domains
> +
> +2967 processors include support for multiple power domains which are used
> +to gate power to one or more peripherals on the processor.
> +
> +Required Properties:
> +- compatible: should be one of the following.
> +    * zte,zx296718-pcu - for zx296718 board's power domain.

board? I'd expect this is for an SoC?

> +- reg: physical base address of the controller and length of memory mapped
> +    region.

#power-domain-cells needed?

> +
> +Example:
> +
> +	pcu_domain: pcu at 0x00117000 {

pcu at 117000

> +		compatible = "zte,zx296718-pcu";
> +		reg = <0x00117000 0x1000>;
> +	};
> -- 
> 2.7.4
>