[PATCH v2 4/4] ARM: dts: keystone: Add "ti, da830-uart" compatible string

[David Lechner]

The TI Keystone SoCs have extra UART registers beyond the standard 8250
registers, so we need a new compatible string to indicate this. Also, at
least one of these registers uses the full 32 bits, so we need to specify
reg-io-width in addition to reg-shift.

"ns16550a" is left in the compatible specification since it does work as
long as the bootloader configures the SoC UART power management registers.

Signed-off-by: David Lechner <david at lechnology.com>
---

v2 changes:
* This is a new patch in v2


 arch/arm/boot/dts/keystone-k2g.dtsi | 2 +-
 arch/arm/boot/dts/keystone-k2l.dtsi | 4 ++--
 arch/arm/boot/dts/keystone.dtsi     | 4 ++--
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index 63c7cf0c..7d7b9a8 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -90,7 +90,7 @@
 		};
 
 		uart0: serial at 02530c00 {
-			compatible = "ns16550a";
+			compatible = "ti,da830-uart", "ns16550a";
 			current-speed = <115200>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi
index 0c5e74e..e91633f 100644
--- a/arch/arm/boot/dts/keystone-k2l.dtsi
+++ b/arch/arm/boot/dts/keystone-k2l.dtsi
@@ -35,7 +35,7 @@
 		/include/ "keystone-k2l-clocks.dtsi"
 
 		uart2: serial at 02348400 {
-			compatible = "ns16550a";
+			compatible = "ti,da830-uart", "ns16550a";
 			current-speed = <115200>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
@@ -45,7 +45,7 @@
 		};
 
 		uart3:	serial at 02348800 {
-			compatible = "ns16550a";
+			compatible = "ti,da830-uart", "ns16550a";
 			current-speed = <115200>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index 02708ba..9152610 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -98,7 +98,7 @@
 		/include/ "keystone-clocks.dtsi"
 
 		uart0: serial at 02530c00 {
-			compatible = "ns16550a";
+			compatible = "ti,da830-uart", "ns16550a";
 			current-speed = <115200>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
@@ -108,7 +108,7 @@
 		};
 
 		uart1:	serial at 02531000 {
-			compatible = "ns16550a";
+			compatible = "ti,da830-uart", "ns16550a";
 			current-speed = <115200>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-- 
2.7.4