[PATCH 1/4] ARM: dts: move hdmi pinctrl out of board file.

[Srinivas Kandagatla]

This patch moves hdmi pinctrl defination from board file to soc level
pinctrl file. If not this pinctrl setup will be duplicated across all
the apq8064 based board files.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
---
 arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 22 ----------------------
 arch/arm/boot/dts/qcom-apq8064-pins.dtsi   | 19 +++++++++++++++++++
 arch/arm/boot/dts/qcom-apq8064.dtsi        |  2 ++
 3 files changed, 21 insertions(+), 22 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 3d37cab..881ce70 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -75,25 +75,6 @@
 					bias-disable;
 				};
 			};
-
-			hdmi_pinctrl: hdmi-pinctrl {
-				mux {
-					pins = "gpio70", "gpio71", "gpio72";
-					function = "hdmi";
-				};
-
-				pinconf_ddc {
-					pins = "gpio70", "gpio71";
-					bias-pull-up;
-					drive-strength = <2>;
-				};
-
-				pinconf_hpd {
-					pins = "gpio72";
-					bias-pull-down;
-					drive-strength = <16>;
-				};
-			};
 		};
 
 		rpm at 108000 {
@@ -368,9 +349,6 @@
 
 			hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>;
 
-			pinctrl-names = "default";
-			pinctrl-0 = <&hdmi_pinctrl>;
-
 			ports {
 				port at 0 {
 					endpoint {
diff --git a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
index 6b801e7..cba4450 100644
--- a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
@@ -284,4 +284,23 @@
 			bias-disable = <0>;
 		};
 	};
+
+	hdmi_pinctrl: hdmi-pinctrl {
+		mux {
+			pins = "gpio70", "gpio71", "gpio72";
+			function = "hdmi";
+		};
+
+		pinconf_ddc {
+			pins = "gpio70", "gpio71";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		pinconf_hpd {
+			pins = "gpio72";
+			bias-pull-down;
+			drive-strength = <16>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 407a461..e68a8a1 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -1327,6 +1327,8 @@
 
 		hdmi: hdmi-tx at 4a00000 {
 			compatible = "qcom,hdmi-tx-8960";
+			pinctrl-names = "default";
+			pinctrl-0 = <&hdmi_pinctrl>;
 			reg = <0x04a00000 0x2f0>;
 			reg-names = "core_physical";
 			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.10.1