[PATCH v2] mfd: mc13xxx: Set the irq type.

Lee Jones lee.jones at linaro.org
Wed Jan 4 03:09:59 PST 2017


On Fri, 30 Dec 2016, Magnus Lilja wrote:

> Commit 10f9edaeaa30 ("mfd: mc13xxx: Use regmap irq framework for
> interrupts") removed the passing of the IRQF_TRIGGER_HIGH flag when
> registering the interrupt.
> This commit fixes that problem by setting the IRQF_TRIGGER_HIGH flag in
> case no irq type is set via irqd framework (e.g. device tree). In the
> latter case the irq flag from irqd is used.

This looks like a hack.

Why can't you set the trigger type in Device Tree instead?

> Tested on i.MX31 PDK hardware.
> 
> Fixes: 10f9edaeaa30 ("mfd: mc13xxx: Use regmap irq framework for interrupts")
> Cc: <stable at vger.kernel.org> # 3.18.x
> Cc: Lee Jones <lee.jones at linaro.org>
> Signed-off-by: Magnus Lilja <lilja.magnus at gmail.com>
> ---
> Changes from v1 (which was part of a patch series):
>   - Now uses irqd_-functions to check if irq type is defined
>   - Added Fixes: and Cc: to stable kernel.
> 
>  drivers/mfd/mc13xxx-core.c | 8 +++++++-
>  1 file changed, 7 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mfd/mc13xxx-core.c b/drivers/mfd/mc13xxx-core.c
> index d7f54e4..e1757ea 100644
> --- a/drivers/mfd/mc13xxx-core.c
> +++ b/drivers/mfd/mc13xxx-core.c
> @@ -15,6 +15,7 @@
>  #include <linux/of_device.h>
>  #include <linux/platform_device.h>
>  #include <linux/mfd/core.h>
> +#include <linux/irq.h>
>  
>  #include "mc13xxx.h"
>  
> @@ -410,6 +411,7 @@ int mc13xxx_common_init(struct device *dev)
>  	struct mc13xxx *mc13xxx = dev_get_drvdata(dev);
>  	u32 revision;
>  	int i, ret;
> +	unsigned int flags;
>  
>  	mc13xxx->dev = dev;
>  
> @@ -440,7 +442,11 @@ int mc13xxx_common_init(struct device *dev)
>  	mc13xxx->irq_chip.irqs = mc13xxx->irqs;
>  	mc13xxx->irq_chip.num_irqs = ARRAY_SIZE(mc13xxx->irqs);
>  
> -	ret = regmap_add_irq_chip(mc13xxx->regmap, mc13xxx->irq, IRQF_ONESHOT,
> +	flags = irqd_get_trigger_type(irq_get_irq_data(mc13xxx->irq));
> +	flags = (flags == IRQ_TYPE_NONE) ? IRQF_TRIGGER_HIGH : flags;
> +
> +	ret = regmap_add_irq_chip(mc13xxx->regmap, mc13xxx->irq,
> +				  IRQF_ONESHOT | flags,
>  				  0, &mc13xxx->irq_chip, &mc13xxx->irq_data);
>  	if (ret)
>  		return ret;

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog



More information about the linux-arm-kernel mailing list