[PATCH 0/9] ARM: dts: armada388: Introduce Clearfog Base DT

[Gregory CLEMENT]

Hi Russell,
 
 On lun., janv. 02 2017, Russell King <rmk+kernel at armlinux.org.uk> wrote:

> This patch series, based upon the previously submitted fix for the SPI
> flash, reworks the Clearfog DT files to add support for the SolidRun
> Clearfog Base platform.
>
> The conventional model is now known as the "Clearfog Pro" module, which
> has the DSA switch and two PCIe sockets.  The base model is a smaller
> board without the DSA switch, replacing it with a second copper gigabit
> port, and only one PCIe socket.
>
> We retain the original DT file (named armada-388-clearfog.dtb) for
> compatibility with existing installations - not only the filename,
> but also the board name exposed in userspace.


All the series applied on mvebu/dt.

I amended the last two patches because the license text was mangled as
spotted by Alexandre Belloni, so I fixed it while applying the patches.


Thanks,

Gregory


>
>  arch/arm/boot/dts/Makefile                         |   2 +
>  arch/arm/boot/dts/armada-388-clearfog-base.dts     |  94 ++++++
>  arch/arm/boot/dts/armada-388-clearfog-pro.dts      |  55 ++++
>  arch/arm/boot/dts/armada-388-clearfog.dts          | 364 ++++-----------------
>  arch/arm/boot/dts/armada-388-clearfog.dtsi         | 310 ++++++++++++++++++
>  .../arm/boot/dts/armada-38x-solidrun-microsom.dtsi |  21 ++
>  6 files changed, 548 insertions(+), 298 deletions(-)
>  create mode 100644 arch/arm/boot/dts/armada-388-clearfog-base.dts
>  create mode 100644 arch/arm/boot/dts/armada-388-clearfog-pro.dts
>  create mode 100644 arch/arm/boot/dts/armada-388-clearfog.dtsi
>
>

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com