[PATCH v2 05/19] ARM: dts: imx6-sabresd: add OV5642 and OV5640 camera sensors

[Fabio Estevam]

On Tue, Jan 3, 2017 at 6:57 PM, Steve Longerbeam <slongerbeam at gmail.com> wrote:

> +       camera: ov5642 at 3c {
> +               compatible = "ovti,ov5642";
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&pinctrl_ov5642>;
> +               clocks = <&clks IMX6QDL_CLK_CKO>;
> +               clock-names = "xclk";
> +               reg = <0x3c>;
> +               xclk = <24000000>;
> +               DOVDD-supply = <&vgen4_reg>; /* 1.8v */
> +               AVDD-supply = <&vgen5_reg>;  /* 2.8v, rev C board is VGEN3
> +                                               rev B board is VGEN5 */

Please use vgen3 so that by default we have the valid AVDD-supply for
revC boards which is more recent and more the users have access to.

> +       mipi_camera: ov5640 at 3c {
> +               compatible = "ovti,ov5640_mipi";
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&pinctrl_ov5640>;
> +               reg = <0x3c>;
> +               clocks = <&clks IMX6QDL_CLK_CKO>;
> +               clock-names = "xclk";
> +               xclk = <24000000>;
> +               DOVDD-supply = <&vgen4_reg>; /* 1.8v */
> +               AVDD-supply = <&vgen5_reg>;  /* 2.8v, rev C board is VGEN3
> +                                               rev B board is VGEN5 */

Same here.

> +               pinctrl_ov5640: ov5640grp {
> +                       fsl,pins = <
> +                               MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x80000000
> +                               MX6QDL_PAD_SD1_CLK__GPIO1_IO20  0x80000000

Please avoid all the 0x80000000 IOMUX settings and replace them by
their real values.