[PATCH v2 3/3] arm: sti: update sti-cec for HPD notifier support

[Benjamin Gaignard]

To use HPD notifier sti CEC driver needs to get phandle
of the hdmi device.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard at linaro.org>
---
 arch/arm/boot/dts/stih407-family.dtsi | 12 ------------
 arch/arm/boot/dts/stih410.dtsi        | 13 +++++++++++++
 2 files changed, 13 insertions(+), 12 deletions(-)

diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index c8b2944..592d235 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -756,18 +756,6 @@
 				 <&clk_s_c0_flexgen CLK_ETH_PHY>;
 		};
 
-		cec: sti-cec at 094a087c {
-			compatible = "st,stih-cec";
-			reg = <0x94a087c 0x64>;
-			clocks = <&clk_sysin>;
-			clock-names = "cec-clk";
-			interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>;
-			interrupt-names = "cec-irq";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_cec0_default>;
-			resets = <&softreset STIH407_LPM_SOFTRESET>;
-		};
-
 		rng10: rng at 08a89000 {
 			compatible      = "st,rng";
 			reg		= <0x08a89000 0x1000>;
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index 281a124..e8c01f7 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -259,5 +259,18 @@
 			clocks = <&clk_sysin>;
 			interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
 		};
+
+		sti-cec at 094a087c {
+			compatible = "st,stih-cec";
+			reg = <0x94a087c 0x64>;
+			clocks = <&clk_sysin>;
+			clock-names = "cec-clk";
+			interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>;
+			interrupt-names = "cec-irq";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_cec0_default>;
+			resets = <&softreset STIH407_LPM_SOFTRESET>;
+			st,hdmi-handle = <&sti_hdmi>;
+		};
 	};
 };
-- 
1.9.1