[PATCH 3/5] arm64: dts: sun50i: add MMC nodes
Andre Przywara
andre.przywara at arm.com
Mon Jan 2 15:03:44 PST 2017
Signed-off-by: Andre Przywara <andre.przywara at arm.com>
---
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 67 +++++++++++++++++++++++++++
1 file changed, 67 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index e0dcab8..c680566 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -150,6 +150,32 @@
pins = "PB8", "PB9";
function = "uart0";
};
+
+ mmc0_pins: mmc0 at 0 {
+ pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5";
+ function = "mmc0";
+ drive-strength = <30>;
+ };
+
+ mmc0_default_cd_pin: mmc0_cd_pin at 0 {
+ pins = "PF6";
+ function = "gpio_in";
+ bias-pull-up;
+ };
+
+ mmc1_pins: mmc1 at 0 {
+ pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5";
+ function = "mmc1";
+ drive-strength = <30>;
+ };
+
+ mmc2_pins: mmc2 at 0 {
+ pins = "PC1", "PC5", "PC6", "PC8", "PC9",
+ "PC10", "PC11", "PC12", "PC13", "PC14",
+ "PC15", "PC16";
+ function = "mmc2";
+ drive-strength = <30>;
+ };
};
uart0: serial at 1c28000 {
@@ -240,6 +266,47 @@
#size-cells = <0>;
};
+ mmc0: mmc at 1c0f000 {
+ compatible = "allwinner,sun50i-a64-mmc",
+ "allwinner,sun5i-a13-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&ccu 31>, <&ccu 75>;
+ clock-names = "ahb", "mmc";
+ resets = <&ccu 8>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc1: mmc at 1c10000 {
+ compatible = "allwinner,sun50i-a64-mmc",
+ "allwinner,sun5i-a13-mmc";
+ reg = <0x01c10000 0x1000>;
+ clocks = <&ccu 32>, <&ccu 76>;
+ clock-names = "ahb", "mmc";
+ resets = <&ccu 9>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mmc2: mmc at 1c11000 {
+ compatible = "allwinner,sun50i-a64-emmc";
+ reg = <0x01c11000 0x1000>;
+ clocks = <&ccu 33>, <&ccu 77>;
+ clock-names = "ahb", "mmc";
+ resets = <&ccu 10>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
gic: interrupt-controller at 1c81000 {
compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
--
2.8.2
More information about the linux-arm-kernel
mailing list