[PATCH v3 2/3] ARM: dts: imx6: Support Savageboard dual

[Shawn Guo]

On Fri, Dec 09, 2016 at 10:04:35AM +0900, Milo Kim wrote:
> Common savageboard DT file is used for board support.
> Specify this dtb file for i.MX6Q build.
> 
> Signed-off-by: Milo Kim <woogyom.kim at gmail.com>
> ---
>  arch/arm/boot/dts/Makefile               |  1 +
>  arch/arm/boot/dts/imx6dl-savageboard.dts | 50 ++++++++++++++++++++++++++++++++
>  2 files changed, 51 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx6dl-savageboard.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index c558ba7..64660c7 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -348,6 +348,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
>  	imx6dl-sabreauto.dtb \
>  	imx6dl-sabrelite.dtb \
>  	imx6dl-sabresd.dtb \
> +	imx6dl-savageboard.dtb \
>  	imx6dl-ts4900.dtb \
>  	imx6dl-tx6dl-comtft.dtb \
>  	imx6dl-tx6s-8034.dtb \
> diff --git a/arch/arm/boot/dts/imx6dl-savageboard.dts b/arch/arm/boot/dts/imx6dl-savageboard.dts
> new file mode 100644
> index 0000000..2cac30d
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6dl-savageboard.dts
> @@ -0,0 +1,50 @@
> +/*
> + * Copyright (C) 2016 Milo Kim <woogyom.kim at gmail.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This file is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License
> + *     version 2 as published by the Free Software Foundation.
> + *
> + *     This file is distributed in the hope that it will be useful
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + * Or, alternatively
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +
> +#include "imx6dl.dtsi"
> +#include "imx6qdl-savageboard.dtsi"
> +
> +/ {
> +	model = "Poslab SavageBoard Dual";
> +	compatible = "poslab,imx6dl-savageboard", "fsl,imx6dl";

It seems that 'poslab' should be added to
Documentation/devicetree/bindings/vendor-prefixes.txt.

Shawn

> +};
> -- 
> 2.9.3
>