[PATCH v3 02/10] dt-bindings: hisi: Add Hisilicon HiP05/06/07 Djtag dts bindings

[Anurup M]

From: Tan Xiaojun <tanxiaojun at huawei.com>

Add Hisilicon HiP05/06/07 Djtag dts bindings for CPU and IO Die

Signed-off-by: Tan Xiaojun <tanxiaojun at huawei.com>
Signed-off-by: Anurup M <anurup.m at huawei.com>
---
 .../devicetree/bindings/arm/hisilicon/djtag.txt    | 41 ++++++++++++++++++++++
 1 file changed, 41 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/djtag.txt

diff --git a/Documentation/devicetree/bindings/arm/hisilicon/djtag.txt b/Documentation/devicetree/bindings/arm/hisilicon/djtag.txt
new file mode 100644
index 0000000..bbe8b45
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/djtag.txt
@@ -0,0 +1,41 @@
+The Hisilicon Djtag is an independent component which connects with some other
+components in the SoC by Debug Bus. The djtag is available in CPU and IO dies
+in the chip. The djtag controls access to connecting modules of CPU and IO
+dies.
+The various connecting components in CPU die (like L3 cache, L3 cache PMU etc.)
+are accessed by djtag during real time debugging. In IO die there are connecting
+components like RSA. These components appear as devices attached to djtag bus.
+
+Hisilicon HiP05/06/07 djtag for CPU and IO die
+Required properties:
+  - compatible : The value should be as follows
+	(a) "hisilicon,hip05-djtag-v1" for CPU and IO die which use v1 hw in
+	    HiP05 chipset.
+	(b) "hisilicon,hip06-djtag-v1" for CPU die which use v1 hw in HiP06 chipset.
+	(c) "hisilicon,hip06-djtag-v2" for IO die which use v2 hw in HiP06 chipset.
+	(d) "hisilicon,hip07-djtag-v2" for CPU and IO die which use v2 hw in
+	    HiP07 chipset.
+  - reg : Register address and size
+  - hisi-scl-id : The Super Cluster ID for CPU or IO die
+
+Example 1: Djtag for CPU die
+
+	/* for Hisilicon HiP05 djtag for CPU Die */
+	djtag0: djtag at 80010000 {
+		compatible = "hisilicon,hip05-djtag-v1";
+		reg = <0x0 0x80010000 0x0 0x10000>;
+		hisi-scl-id = <0x02>;
+
+		/* All connecting components will appear as child nodes */
+	};
+
+Example 2: Djtag for IO die
+
+	/* for Hisilicon HiP05 djtag for IO Die */
+	djtag1: djtag at d0000000 {
+		compatible = "hisilicon,hip05-djtag-v1";
+		reg = <0x0 0xd0000000 0x0 0x10000>;
+		hisi-scl-id = <0x01>;
+
+		/* All connecting components will appear as child nodes */
+	};
-- 
2.1.4