[PATCHv9 6/6] dmaengine: rcar-dmac: add iommu support for slave transfers

Laurent Pinchart laurent.pinchart at ideasonboard.com
Sun Jan 1 15:08:04 PST 2017


Hi Niklas,

On Monday 05 Sep 2016 12:52:44 Laurent Pinchart wrote:
> On Wednesday 10 Aug 2016 13:22:19 Niklas Söderlund wrote:
> > Enable slave transfers to a device behind a IPMMU by mapping the slave
> > addresses using the dma-mapping API.
> > 
> > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas at ragnatech.se>
> > ---
> > drivers/dma/sh/rcar-dmac.c | 82 ++++++++++++++++++++++++++++++++++++-----
> > 1 file changed, 74 insertions(+), 8 deletions(-)
> > 
> > diff --git a/drivers/dma/sh/rcar-dmac.c b/drivers/dma/sh/rcar-dmac.c
> > index cf983a9..22a5e40 100644
> > --- a/drivers/dma/sh/rcar-dmac.c
> > +++ b/drivers/dma/sh/rcar-dmac.c

[snip]

> > +static int rcar_dmac_map_slave_addr(struct dma_chan *chan,
> > +				    enum dma_transfer_direction dir)
> > +{
> > +	struct rcar_dmac_chan *rchan = to_rcar_dmac_chan(chan);
> > +	struct rcar_dmac_chan_map *map = &rchan->map;
> > +	phys_addr_t dev_addr;
> > +	size_t dev_size;
> > +	enum dma_data_direction dev_dir;
> > +
> > +	if (dir == DMA_DEV_TO_MEM) {
> > +		dev_addr = rchan->src.slave_addr;
> > +		dev_size = rchan->src.xfer_size;
> > +		dev_dir = DMA_TO_DEVICE;
> 
> Shouldn't this be DMA_FROM_DEVICE, and DMA_TO_DEVICE below ?

This comment can be ignored (thank you Robin for the explanation), but ...

> > +	} else {
> > +		dev_addr = rchan->dst.slave_addr;
> > +		dev_size = rchan->dst.xfer_size;
> > +		dev_dir = DMA_FROM_DEVICE;
> > +	}
> > +
> > +	/* Reuse current map if possible. */
> > +	if (dev_addr == map->slave.slave_addr &&
> > +	    dev_size == map->slave.xfer_size &&
> > +	    dev_dir == map->dir)
> > +		return 0;
> > +
> > +	/* Remove old mapping if present. */
> > +	if (map->slave.xfer_size)
> > +		dma_unmap_resource(chan->device->dev, map->addr,
> > +				   map->slave.xfer_size, map->dir, 0);
> 
> Unless I'm mistaken the resource will not be unmapped when freeing channel
> resources, will it ?

I believe this one still needs to be addressed.

> > +	map->slave.xfer_size = 0;
> > +
> > +	/* Create new slave address map. */
> > +	map->addr = dma_map_resource(chan->device->dev, dev_addr, dev_size,
> > +				     dev_dir, 0);
> > +
> > +	if (dma_mapping_error(chan->device->dev, map->addr)) {
> > +		dev_err(chan->device->dev,
> > +			"chan%u: failed to map %zx@%pap", rchan->index,
> > +			dev_size, &dev_addr);
> > +		return -EIO;
> > +	}
> > +
> > +	dev_dbg(chan->device->dev, "chan%u: map %zx@%pap to %pad dir: %s\n",
> > +		rchan->index, dev_size, &dev_addr, &map->addr,
> 
> > +		dev_dir == DMA_TO_DEVICE ? "DMA_TO_DEVICE" :
> "DMA_FROM_DEVICE");
> 
> > +
> > +	map->slave.slave_addr = dev_addr;
> > +	map->slave.xfer_size = dev_size;
> > +	map->dir = dev_dir;
> > +
> > +	return 0;
> > +}

[snip]

-- 
Regards,

Laurent Pinchart




More information about the linux-arm-kernel mailing list