[PATCH v4 4/7] ARM: davinci: remove davinci_set_refclk_rate()
David Lechner
david at lechnology.com
Sun Dec 31 15:39:45 PST 2017
This removes the davinci_set_refclk_rate() function. This was used to set
the ref_clk rate after all clocks had been registered when clocks were
registered from a static table.
However, now it is possible to modify the rate before registering the
clocks in the first place by passing the rate as a function parameter.
The aux_clkin rate is also passed as a parameter since technically it is
also board-specific.
Signed-off-by: David Lechner <david at lechnology.com>
---
arch/arm/mach-davinci/board-dm646x-evm.c | 12 +++++++-----
arch/arm/mach-davinci/clock.c | 32 --------------------------------
arch/arm/mach-davinci/clock.h | 1 -
arch/arm/mach-davinci/davinci.h | 2 +-
arch/arm/mach-davinci/dm646x.c | 18 +++++++-----------
5 files changed, 15 insertions(+), 50 deletions(-)
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index dafc852..c8f517b 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -716,17 +716,19 @@ static void __init evm_init_i2c(void)
}
#endif
-#define DM6467T_EVM_REF_FREQ 33000000
-
static void __init davinci_map_io(void)
{
dm646x_init();
}
+static void __init dm6467_evm_init_time(void)
+{
+ dm646x_init_time(27000000, 24000000);
+}
+
static void __init dm6467t_evm_init_time(void)
{
- dm646x_init_time();
- davinci_set_refclk_rate(DM6467T_EVM_REF_FREQ);
+ dm646x_init_time(33000000, 24000000);
}
#define DM646X_EVM_PHY_ID "davinci_mdio-0:01"
@@ -800,7 +802,7 @@ MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
.atag_offset = 0x100,
.map_io = davinci_map_io,
.init_irq = davinci_irq_init,
- .init_time = dm646x_init_time,
+ .init_time = dm6467_evm_init_time,
.init_machine = evm_init,
.init_late = davinci_init_late,
.dma_zone_size = SZ_128M,
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index f82a90c..52b95e2 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -575,38 +575,6 @@ int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv,
}
EXPORT_SYMBOL(davinci_set_pllrate);
-/**
- * davinci_set_refclk_rate() - Set the reference clock rate
- * @rate: The new rate.
- *
- * Sets the reference clock rate to a given value. This will most likely
- * result in the entire clock tree getting updated.
- *
- * This is used to support boards which use a reference clock different
- * than that used by default in <soc>.c file. The reference clock rate
- * should be updated early in the boot process; ideally soon after the
- * clock tree has been initialized once with the default reference clock
- * rate (davinci_clk_init()).
- *
- * Returns 0 on success, error otherwise.
- */
-int davinci_set_refclk_rate(unsigned long rate)
-{
- struct clk *refclk;
-
- refclk = clk_get(NULL, "ref");
- if (IS_ERR(refclk)) {
- pr_err("%s: failed to get reference clock\n", __func__);
- return PTR_ERR(refclk);
- }
-
- clk_set_rate(refclk, rate);
-
- clk_put(refclk);
-
- return 0;
-}
-
struct clk * __init davinci_clk_init(struct clk *clk)
{
if (!clk->recalc) {
diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h
index 66c40a2..61fcdaa 100644
--- a/arch/arm/mach-davinci/clock.h
+++ b/arch/arm/mach-davinci/clock.h
@@ -122,7 +122,6 @@ struct clk *davinci_clk_init(struct clk *clk);
int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv,
unsigned int mult, unsigned int postdiv);
int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate);
-int davinci_set_refclk_rate(unsigned long rate);
int davinci_simple_set_rate(struct clk *clk, unsigned long rate);
int davinci_clk_reset(struct clk *clk, bool reset);
void davinci_clk_enable(struct clk *clk);
diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h
index d70f4d9..270cef8 100644
--- a/arch/arm/mach-davinci/davinci.h
+++ b/arch/arm/mach-davinci/davinci.h
@@ -111,7 +111,7 @@ int dm644x_gpio_register(void);
/* DM646x function declarations */
void dm646x_init(void);
-void dm646x_init_time(void);
+void dm646x_init_time(unsigned long ref_clk_rate, unsigned long aux_clkin_rate);
void dm646x_init_mcasp0(struct snd_platform_data *pdata);
void dm646x_init_mcasp1(struct snd_platform_data *pdata);
int dm646x_init_edma(struct edma_rsv_info *rsv);
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 0cd5d51..31dbe93 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -39,12 +39,6 @@
#define VSCLKDIS_MASK (BIT_MASK(11) | BIT_MASK(10) | BIT_MASK(9) |\
BIT_MASK(8))
-/*
- * Device specific clocks
- */
-#define DM646X_REF_FREQ 27000000
-#define DM646X_AUX_FREQ 24000000
-
#define DM646X_EMAC_BASE 0x01c80000
#define DM646X_EMAC_MDIO_BASE (DM646X_EMAC_BASE + 0x4000)
#define DM646X_EMAC_CNTRL_OFFSET 0x0000
@@ -64,13 +58,11 @@ static struct pll_data pll2_data = {
static struct clk ref_clk = {
.name = "ref_clk",
- .rate = DM646X_REF_FREQ,
.set_rate = davinci_simple_set_rate,
};
static struct clk aux_clkin = {
.name = "aux_clkin",
- .rate = DM646X_AUX_FREQ,
};
static struct clk pll1_clk = {
@@ -320,10 +312,13 @@ static struct clk vpif1_clk = {
.flags = ALWAYS_ENABLED,
};
-static __init void dm646x_clk_init(void)
+static __init void dm646x_clk_init(unsigned long ref_clk_rate,
+ unsigned long aux_clkin_rate)
{
struct clk *clk;
+ ref_clk.rate = ref_clk_rate;
+ aux_clkin.rate = aux_clkin_rate;
clk = davinci_clk_init(&ref_clk);
clk_register_clkdev(clk, "ref", NULL);
clk = davinci_clk_init(&aux_clkin);
@@ -998,9 +993,10 @@ void __init dm646x_init(void)
davinci_map_sysmod();
}
-void __init dm646x_init_time(void)
+void __init dm646x_init_time(unsigned long ref_clk_rate,
+ unsigned long aux_clkin_rate)
{
- dm646x_clk_init();
+ dm646x_clk_init(ref_clk_rate, aux_clkin_rate);
davinci_timer_init();
}
--
2.7.4
More information about the linux-arm-kernel
mailing list