[PATCH 03/11] drm/bridge/synopsys: dw-hdmi: Enable workaround for v1.32a
Jernej Skrabec
jernej.skrabec at siol.net
Sat Dec 30 13:01:55 PST 2017
Allwinner SoCs have dw hdmi controller v1.32a which exhibits same
magenta line issue as i.MX6Q and i.MX6DL. Enable workaround for it.
Tests show that one iteration is enough.
Signed-off-by: Jernej Skrabec <jernej.skrabec at siol.net>
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index a38db40ce990..7ca14d7325b5 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -1634,9 +1634,10 @@ static void dw_hdmi_clear_overflow(struct dw_hdmi *hdmi)
* then write one of the FC registers several times.
*
* The number of iterations matters and depends on the HDMI TX revision
- * (and possibly on the platform). So far only i.MX6Q (v1.30a) and
- * i.MX6DL (v1.31a) have been identified as needing the workaround, with
- * 4 and 1 iterations respectively.
+ * (and possibly on the platform). So far i.MX6Q (v1.30a), i.MX6DL
+ * (v1.31a) and multiple Allwinner SoCs (v1.32a) have been identified
+ * as needing the workaround, with 4 iterations for v1.30a and 1
+ * iteration for others.
*/
switch (hdmi->version) {
@@ -1644,6 +1645,7 @@ static void dw_hdmi_clear_overflow(struct dw_hdmi *hdmi)
count = 4;
break;
case 0x131a:
+ case 0x132a:
count = 1;
break;
default:
--
2.15.1
More information about the linux-arm-kernel
mailing list