[PATCH v7 00/11] Armada thermal: improvements and A7K/A8K SoCs support

Miquel Raynal miquel.raynal at free-electrons.com
Fri Dec 22 08:14:02 PST 2017


Hi,

This series takes over Baruch's series by integrating his patches about
supporting thermal on Armada 7K and 8K SoCs within a larger series with
several improvements on the armada_thermal.c driver.

For now, Armada 380 and CP110 compatibles share the same initialization
routine but this will probably change in the near future when adding
support for overheat interrupts.

DT bindings documentation is updated to match existing code.

Armada AP806 and CP110 DT are also updated with thermal nodes and have
already been accepted (thus absent in this series).

Thank you,
Miquèl


Changes since v6:
  - Added Gregory's Tested-by tags.
  - Added Rob's Reviewed-by tag on the bindings.
  - Addressed Baruch's comment on the temperature derivation.


Baruch Siach (4):
  dt-bindings: thermal: Describe Armada AP806 and CP110
  thermal: armada: Use msleep for long delays
  thermal: armada: Add support for Armada AP806
  thermal: armada: Add support for Armada CP110

Miquel Raynal (7):
  thermal: armada: Simplify the check of the validity bit
  thermal: armada: Clarify control registers accesses
  thermal: armada: Use real status register name
  thermal: armada: Update Kconfig and module description
  thermal: armada: Change sensors trim default value
  thermal: armada: Wait sensors validity before exiting the init
    callback
  thermal: armada: Give meaningful names to the thermal zones

 .../devicetree/bindings/thermal/armada-thermal.txt |  37 ++-
 drivers/thermal/Kconfig                            |   4 +-
 drivers/thermal/armada_thermal.c                   | 253 +++++++++++++++------
 3 files changed, 214 insertions(+), 80 deletions(-)

-- 
2.11.0




More information about the linux-arm-kernel mailing list