[PATCH 32/37] ARM: dts: iwg22d-sodimm: Sound PIO support
Simon Horman
horms+renesas at verge.net.au
Fri Dec 22 02:30:10 PST 2017
From: Biju Das <biju.das at bp.renesas.com>
Enable sound PIO support on carrier board.
Signed-off-by: Biju Das <biju.das at bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro at bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts | 46 +++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
index 5d4b7d203f8d..b6521da8b766 100644
--- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
+++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
@@ -32,6 +32,21 @@
clock-frequency = <26000000>;
};
+ rsnd_sgtl5000: sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&sndcodec>;
+ simple-audio-card,frame-master = <&sndcodec>;
+
+ sndcpu: simple-audio-card,cpu {
+ sound-dai = <&rcar_sound>;
+ };
+
+ sndcodec: simple-audio-card,codec {
+ sound-dai = <&sgtl5000>;
+ };
+ };
+
vccq_sdhi0: regulator-vccq-sdhi0 {
compatible = "regulator-gpio";
@@ -141,6 +156,11 @@
power-source = <3300>;
};
+ sound_pins: sound {
+ groups = "ssi34_ctrl", "ssi3_data", "ssi4_data";
+ function = "ssi";
+ };
+
usb0_pins: usb0 {
groups = "usb0";
function = "usb0";
@@ -152,6 +172,23 @@
};
};
+&rcar_sound {
+ pinctrl-0 = <&sound_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ /* Single DAI */
+
+ #sound-dai-cells = <0>;
+
+ rcar_sound,dai {
+ dai0 {
+ playback = <&ssi3>;
+ capture = <&ssi4>;
+ };
+ };
+};
+
&scif4 {
pinctrl-0 = <&scif4_pins>;
pinctrl-names = "default";
@@ -169,6 +206,15 @@
status = "okay";
};
+&ssi3 {
+ pio-transfer;
+};
+
+&ssi4 {
+ pio-transfer;
+ shared-pin;
+};
+
&usbphy {
status = "okay";
};
--
2.11.0
More information about the linux-arm-kernel
mailing list