[PATCH v7 5/5] clk: aspeed: Add reset controller
Joel Stanley
joel at jms.id.au
Thu Dec 21 18:45:22 PST 2017
There are some resets that are not associated with gates. These are
represented by a reset controller.
Reviewed-by: Andrew Jeffery <andrew at aj.id.au>
Signed-off-by: Joel Stanley <joel at jms.id.au>
---
v7:
- Rebase on dt-bindings patch
v5:
- Add Andrew's Reviewed-by
v3:
- Add named initalisers for the reset defines
- Add define for ADC
---
drivers/clk/clk-aspeed.c | 82 +++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 81 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/clk-aspeed.c b/drivers/clk/clk-aspeed.c
index dbd3c7774831..6fb344730cea 100644
--- a/drivers/clk/clk-aspeed.c
+++ b/drivers/clk/clk-aspeed.c
@@ -8,6 +8,7 @@
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
+#include <linux/reset-controller.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
@@ -267,6 +268,68 @@ static const struct clk_ops aspeed_clk_gate_ops = {
.is_enabled = aspeed_clk_is_enabled,
};
+/**
+ * struct aspeed_reset - Aspeed reset controller
+ * @map: regmap to access the containing system controller
+ * @rcdev: reset controller device
+ */
+struct aspeed_reset {
+ struct regmap *map;
+ struct reset_controller_dev rcdev;
+};
+
+#define to_aspeed_reset(p) container_of((p), struct aspeed_reset, rcdev)
+
+static const u8 aspeed_resets[] = {
+ [ASPEED_RESET_XDMA] = 25,
+ [ASPEED_RESET_MCTP] = 24,
+ [ASPEED_RESET_ADC] = 23,
+ [ASPEED_RESET_JTAG_MASTER] = 22,
+ [ASPEED_RESET_MIC] = 18,
+ [ASPEED_RESET_PWM] = 9,
+ [ASPEED_RESET_PCIVGA] = 8,
+ [ASPEED_RESET_I2C] = 2,
+ [ASPEED_RESET_AHB] = 1,
+};
+
+static int aspeed_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct aspeed_reset *ar = to_aspeed_reset(rcdev);
+ u32 rst = BIT(aspeed_resets[id]);
+
+ return regmap_update_bits(ar->map, ASPEED_RESET_CTRL, rst, 0);
+}
+
+static int aspeed_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct aspeed_reset *ar = to_aspeed_reset(rcdev);
+ u32 rst = BIT(aspeed_resets[id]);
+
+ return regmap_update_bits(ar->map, ASPEED_RESET_CTRL, rst, rst);
+}
+
+static int aspeed_reset_status(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct aspeed_reset *ar = to_aspeed_reset(rcdev);
+ u32 val, rst = BIT(aspeed_resets[id]);
+ int ret;
+
+ ret = regmap_read(ar->map, ASPEED_RESET_CTRL, &val);
+ if (ret)
+ return ret;
+
+ return !!(val & rst);
+}
+
+static const struct reset_control_ops aspeed_reset_ops = {
+ .assert = aspeed_reset_assert,
+ .deassert = aspeed_reset_deassert,
+ .status = aspeed_reset_status,
+};
+
static struct clk_hw *aspeed_clk_hw_register_gate(struct device *dev,
const char *name, const char *parent_name, unsigned long flags,
struct regmap *map, u8 clock_idx, u8 reset_idx,
@@ -308,10 +371,11 @@ static int aspeed_clk_probe(struct platform_device *pdev)
{
const struct aspeed_clk_soc_data *soc_data;
struct device *dev = &pdev->dev;
+ struct aspeed_reset *ar;
struct regmap *map;
struct clk_hw *hw;
u32 val, rate;
- int i;
+ int i, ret;
map = syscon_node_to_regmap(dev->of_node);
if (IS_ERR(map)) {
@@ -319,6 +383,22 @@ static int aspeed_clk_probe(struct platform_device *pdev)
return PTR_ERR(map);
}
+ ar = devm_kzalloc(dev, sizeof(*ar), GFP_KERNEL);
+ if (!ar)
+ return -ENOMEM;
+
+ ar->map = map;
+ ar->rcdev.owner = THIS_MODULE;
+ ar->rcdev.nr_resets = ARRAY_SIZE(aspeed_resets);
+ ar->rcdev.ops = &aspeed_reset_ops;
+ ar->rcdev.of_node = dev->of_node;
+
+ ret = devm_reset_controller_register(dev, &ar->rcdev);
+ if (ret) {
+ dev_err(dev, "could not register reset controller\n");
+ return ret;
+ }
+
/* SoC generations share common layouts but have different divisors */
soc_data = of_device_get_match_data(dev);
if (!soc_data) {
--
2.15.1
More information about the linux-arm-kernel
mailing list