[PATCH 4/4] ARM: dts: vf610-zii-dev-rev-b: add interrupts for 88e1545 PHY

Russell King - ARM Linux linux at armlinux.org.uk
Thu Dec 21 16:14:07 PST 2017


On Thu, Dec 21, 2017 at 11:53:47PM +0100, Linus Walleij wrote:
> On Thu, Dec 21, 2017 at 6:32 PM, Russell King - ARM Linux
> <linux at armlinux.org.uk> wrote:
> 
> > What we have here is _really_ a shared interrupt between four
> > separate devices, and we need a way to sanely describe resources
> > shared between several device instances to pinmux.  Unfortunately,
> > it seems pinmux is designed around one device having exclusive use
> > of a resource, which makes it hard to describe shared interrupts in
> > DT.
> >
> > Given that DT should be a description of the hardware, and should be
> > independent of the OS implementation, I'd say this is a pinmux bug,
> > because pinmux gets in the way of describing the hardware correctly.
> > ;)
> 
> Hm that would be annoying. But when I look at it I think it would
> actually work. Did you try just assigning the same pin control
> state to all the PHY's and see what happens?
> 
> Just set
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_mv88e1545>;
> 
> on all of them?

It was tried, DT was happy, but the kernel on boot complained because
pinctrl objected, which caused the drivers to fail to bind:

libphy: mdio: probed
vf610-pinctrl 40048000.iomuxc: pin VF610_PAD_PTB0 already requested by !mdio-mux!mdio at 4!switch at 0!mdio:00; cannot claim for !mdio-mux!mdio at 4!switch at 0!mdio:01
vf610-pinctrl 40048000.iomuxc: pin-22 (!mdio-mux!mdio at 4!switch at 0!mdio:01) status -22
vf610-pinctrl 40048000.iomuxc: could not request pin 22 (VF610_PAD_PTB0) from group pinctrl-mv88e1545  on device 40048000.iomuxc
Marvell 88E1545 !mdio-mux!mdio at 4!switch at 0!mdio:01: Error applying setting, reverse things back
Marvell 88E1545: probe of !mdio-mux!mdio at 4!switch at 0!mdio:01 failed with error -22
vf610-pinctrl 40048000.iomuxc: pin VF610_PAD_PTB0 already requested by !mdio-mux!mdio at 4!switch at 0!mdio:00; cannot claim for !mdio-mux!mdio at 4!switch at 0!mdio:02
vf610-pinctrl 40048000.iomuxc: pin-22 (!mdio-mux!mdio at 4!switch at 0!mdio:02) status -22
vf610-pinctrl 40048000.iomuxc: could not request pin 22 (VF610_PAD_PTB0) from group pinctrl-mv88e1545  on device 40048000.iomuxc
Marvell 88E1545 !mdio-mux!mdio at 4!switch at 0!mdio:02: Error applying setting, reverse things back
Marvell 88E1545: probe of !mdio-mux!mdio at 4!switch at 0!mdio:02 failed with error -22

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 8.8Mbps down 630kbps up
According to speedtest.net: 8.21Mbps down 510kbps up



More information about the linux-arm-kernel mailing list