[PATCH v3 1/9] ARM: dts: imx7-colibri: move and rename USB Host power regulator

[Shawn Guo]

On Tue, Dec 19, 2017 at 07:10:30PM +0100, Stefan Agner wrote:
> The Colibri default which enables USB Host power is not necessarily
> tied to the OTG2 controller, some carrier board use the pin to
> control USB power for both controllers. Hence name the pinctrl
> group more generic.
> 
> Also move the regulator to the generic eval-v3 device tree since
> the regulator is always on the carrier board. In the Colibri iMX7S
> case the regulator is just not used.  This allows to reuse the
> regulator in a upcoming SKU Colibri iMX7D 1GB with eMMC.
> 
> Signed-off-by: Stefan Agner <stefan at agner.ch>
> Reviewed-by: Fabio Estevam <fabio.estevam at nxp.com>

Applied all, thanks.