[PATCH] ARM: dts: imx6qdl-zii-rdu2: Remove device_type from PCI subnode

[Shawn Guo]

On Sat, Dec 02, 2017 at 03:08:08PM -0200, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam at nxp.com>
> 
> device_type = "pci" should be used for the SoC level PCI controller and
> it is already present at imx6qdl.dtsi.
> 
> Remove it from the subnode in order to fix the following build
> warnings with W=1:
> 
> arch/arm/boot/dts/imx6q-zii-rdu2.dtb: Warning (pci_bridge): Node /soc/pcie at 1ffc000/pci at 0 missing ranges for PCI bridge (or not a bridge)
> arch/arm/boot/dts/imx6q-zii-rdu2.dtb: Warning (pci_bridge): Node /soc/pcie at 1ffc000/pci at 0 missing bus-range for PCI bridge
> arch/arm/boot/dts/imx6q-zii-rdu2.dtb: Warning (unit_address_format): Failed prerequisite 'pci_bridge'
> arch/arm/boot/dts/imx6q-zii-rdu2.dtb: Warning (pci_device_reg): Failed prerequisite 'pci_bridge'
> arch/arm/boot/dts/imx6q-zii-rdu2.dtb: Warning (pci_device_bus_num): Failed prerequisite 'pci_bridge'
> 
> Cc: Lucas Stach <l.stach at pengutronix.de>
> Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>

Applied, thanks.