[PATCH 1/2] arm64: dts: exynos: Use lower case hex addresses in node unit addresses
Krzysztof Kozlowski
krzk at kernel.org
Wed Dec 20 11:27:01 PST 2017
Convert all hex addresses in node unit addresses to lower case to
fix warnings like:
arch/arm64/boot/dts/exynos/exynos5433-tm2e.dtb: Warning (simple_bus_reg):
Node /soc/video-scaler at 13C00000 simple-bus unit address format error, expected "13c00000"
Conversion was done using sed:
$ sed -e 's/@\([a-zA-Z0-9_-]*\) {/@\L\1 {/' -i arch/arm64/boot/dts/exynos/*.dts*
Signed-off-by: Krzysztof Kozlowski <krzk at kernel.org>
---
arch/arm64/boot/dts/exynos/exynos5433.dtsi | 8 ++++----
arch/arm64/boot/dts/exynos/exynos7.dtsi | 4 ++--
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 1962b8074349..0ba5df825eff 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -994,7 +994,7 @@
reg = <0x145f0000 0x1038>;
};
- gsc_0: video-scaler at 13C00000 {
+ gsc_0: video-scaler at 13c00000 {
compatible = "samsung,exynos5433-gsc";
reg = <0x13c00000 0x1000>;
interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
@@ -1008,7 +1008,7 @@
power-domains = <&pd_gscl>;
};
- gsc_1: video-scaler at 13C10000 {
+ gsc_1: video-scaler at 13c10000 {
compatible = "samsung,exynos5433-gsc";
reg = <0x13c10000 0x1000>;
interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
@@ -1022,7 +1022,7 @@
power-domains = <&pd_gscl>;
};
- gsc_2: video-scaler at 13C20000 {
+ gsc_2: video-scaler at 13c20000 {
compatible = "samsung,exynos5433-gsc";
reg = <0x13c20000 0x1000>;
interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
@@ -1049,7 +1049,7 @@
power-domains = <&pd_mscl>;
};
- mfc: codec at 152E0000 {
+ mfc: codec at 152e0000 {
compatible = "samsung,exynos5433-mfc";
reg = <0x152E0000 0x10000>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index 9a3fbed1765a..3504837b1d43 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -103,7 +103,7 @@
#size-cells = <1>;
ranges;
- pdma0: pdma at 10E10000 {
+ pdma0: pdma at 10e10000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x10E10000 0x1000>;
interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
@@ -114,7 +114,7 @@
#dma-requests = <32>;
};
- pdma1: pdma at 10EB0000 {
+ pdma1: pdma at 10eb0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x10EB0000 0x1000>;
interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
--
2.11.0
More information about the linux-arm-kernel
mailing list