[PATCH v4] staging: fsl-mc: move bus driver out of staging

[Greg KH]

On Tue, Dec 19, 2017 at 03:21:19PM +0000, Laurentiu Tudor wrote:
> 
> 
> On 12/19/2017 04:48 PM, Greg KH wrote:
> > On Wed, Nov 29, 2017 at 12:08:44PM +0200, laurentiu.tudor at nxp.com wrote:
> >> From: Stuart Yoder <stuart.yoder at nxp.com>
> >>
> >> Move the source files out of staging into their final locations:
> >>    -include files in drivers/staging/fsl-mc/include go to include/linux/fsl
> >>    -irq-gic-v3-its-fsl-mc-msi.c goes to drivers/irqchip
> >>    -source in drivers/staging/fsl-mc/bus goes to drivers/bus/fsl-mc
> >>    -README.txt, providing and overview of DPAA goes to
> >>     Documentation/dpaa2/overview.txt
> >>
> >> Update or delete other remaining staging files-- Makefile, Kconfig, TODO.
> >> Update dpaa2_eth and dpio staging drivers.
> >>
> >> Signed-off-by: Stuart Yoder <stuyoder at gmail.com>
> >> Signed-off-by: Laurentiu Tudor <laurentiu.tudor at nxp.com>
> >> [Laurentiu: rebased, add dpaa2_eth and dpio #include updates]
> >> Cc: Thomas Gleixner <tglx at linutronix.de>
> >> Cc: Jason Cooper <jason at lakedaemon.net>
> >> Cc: Marc Zyngier <marc.zyngier at arm.com>
> >> ---
> >> Notes:
> >>      -v4:
> >>        - regenerated patch with renames detection disabled (Andrew Lunn)
> >>      -v3:
> >>        - rebased
> >
> > Ok, meta-comments on the structure of the code.
> >
> > You have 8 .h files that are "private" to your bus logic.  That's 7 too
> > many, some of them have a bigger license header than actual content :)
> >
> > Please consolidate into 1.
> >
> > Also, the headers should be moved to SPDX format to get rid of the
> > boilerplate.  I _think_ it's BSD/GPL, right?  Hard to tell :(
> 
> It's 3-clause BSD and GPLv2. Will make it clear when moving to SPDX.

Thanks.

> > Your "public" .h file does not need to go into a subdirectory, just name
> > it fsl-mc.h and put it in include/linux/.
> 
> There's already a "fsl" subdirectory in include/linux/ so it seemed to 
> make sense to use it.

Ah, missed that.  Ok, nevermind :)`

> > One comment on the fields in your .h file, all of the user/kernel
> > crossing boundry structures need to use the "__" variant of types, like
> > "__u8" and the like.  You mix and match them for some reason, you need
> > to be consistent.
> >
> > Also, what's up with the .h files in drivers/staging/fsl-bus/include?
> > You didn't touch those with this movement, right?  Why?
> 
> Those are not part of the bus "core". Some of them are part of the DPBP 
> and DPCON device types APIs and are used by drivers probing on this bus 
> and the rest are part of the DPIO driver which is also used by other 
> drivers. Since these devices (DPBP, DPCON, DPIO) are interfaces used by 
> all the other drivers it made sense to group them together with the bus.

But all of these .h files are only used by the code in this specific
directory, no where else.  So just mush them all together, having
individual .h files doesn't really help anyone here, right?  It's just
more files for no good reason.  And, it might help you see if you really
need all of the info in those files :)

> > For this initial move, only move the bus "core" code out, not the other
> > stuff like:
> >
> >>   drivers/irqchip/Makefile                           |   1 +
> >>   drivers/irqchip/irq-gic-v3-its-fsl-mc-msi.c        | 119 +++
> >
> > these should be a separate file move, right?
> 
> This bus uses msi interrupts and this file contains glue code needed to 
> enable interrupts in the GICv3 irqchip. Without this I don't think the 
> bus driver can work because itself makes use of interrupts.

How is this all working today?  Just leave the non-bus code alone, and
move the irqchip code as a separate patch.

> >>   drivers/staging/fsl-dpaa2/ethernet/README          |   2 +-
> >
> > Why does a README file for a different driver need to be touched?
> 
> It mentions a file in the old location of the bus. This is how the diff 
> looks:
> 
> -       drivers/staging/fsl-mc/README.txt
> +       Documentation/dpaa2/overview.txt

Ah.

> >>   drivers/staging/fsl-dpaa2/ethernet/dpaa2-eth.c     |   2 +-
> >>   drivers/staging/fsl-dpaa2/ethernet/dpni.c          |   2 +-
> >>   drivers/staging/fsl-mc/README.txt                  | 386 ---------
> >
> > This file gets moved to the Documentation directory, yet it is not tied
> > into the documentation build process, that's not good.
> 
> Will look into that.
> 
> > It doesn't need to have a separate directory either, right?
> 
> Agreed, maybe the destination directory isn't the best choice. Maybe 
> bus-devices/fsl-mc.txt makes more sense? Can you please suggest?

It should be in .rst format, and tied into the documentation build
somehow, I don't really know where new stuff is going, you should look
at recent changes in that directory for more examples.

thanks,

greg k-h