[PATCH 0/8] ARM: dts: dra7: Add ti-opp-supply nodes and enable 1.5 GHz
Dave Gerlach
d-gerlach at ti.com
Tue Dec 19 07:24:18 PST 2017
Hi,
This series adds the additional regulators and ti-opp-supply nodes to enable
ABB regulator scaling and AVS Class0 for dra7 and am57 platforms. In addition
to this the 1.5 GHz OPP is enabled for any platforms in the dra7 and am57
family that support it based on the detection done by the ti-cpufreq driver.
Regards,
Dave
Dave Gerlach (8):
ARM: dts: dra7: Add vbb-supply to cpu and additional voltages
ARM: dts: dra7: Add MPU OPP supply node
ARM: dts: dra7: Enable 1.5 GHz operation for the CPU
ARM: dts: am57xx-beagle-x15-common: Add cpu0 vdd supply
ARM: dts: dra7-evm: Add cpu0 vdd supply
ARM: dts: dra72-evm-tps65917: Add cpu0 vdd supply
ARM: dts: am571x-idk: Add cpu0 vdd supply
ARM: dts: am572x-idk: Add cpu0 vdd supply
arch/arm/boot/dts/am571x-idk.dts | 4 ++++
arch/arm/boot/dts/am572x-idk.dts | 4 ++++
arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi | 2 +-
arch/arm/boot/dts/dra7-evm.dts | 2 +-
arch/arm/boot/dts/dra7.dtsi | 29 +++++++++++++++++++++++--
arch/arm/boot/dts/dra72-evm-tps65917.dtsi | 4 ++++
6 files changed, 41 insertions(+), 4 deletions(-)
--
2.15.1
More information about the linux-arm-kernel
mailing list