[PATCH 2/3] i2c: mediatek: Add i2c compatible for MediaTek MT2712
Jun Gao
jun.gao at mediatek.com
Mon Dec 18 22:51:02 PST 2017
From: Jun Gao <jun.gao at mediatek.com>
Add i2c compatible for MT2712. Compare to MT8173 i2c controller,
internal divider of i2c source clock need to be configured for
MT2712 i2c speed calculation.
Signed-off-by: Jun Gao <jun.gao at mediatek.com>
---
drivers/i2c/busses/i2c-mt65xx.c | 31 +++++++++++++++++++++++++++----
1 file changed, 27 insertions(+), 4 deletions(-)
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 09d288c..58d6401 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -61,6 +61,7 @@
#define I2C_DMA_HARD_RST 0x0002
#define I2C_DMA_4G_MODE 0x0001
+#define I2C_DEFAULT_CLK_DIV 5
#define I2C_DEFAULT_SPEED 100000 /* hz */
#define MAX_FS_MODE_SPEED 400000
#define MAX_HS_MODE_SPEED 3400000
@@ -127,6 +128,7 @@ enum I2C_REGS_OFFSET {
OFFSET_DEBUGSTAT = 0x64,
OFFSET_DEBUGCTRL = 0x68,
OFFSET_TRANSFER_LEN_AUX = 0x6c,
+ OFFSET_CLOCK_DIV = 0x70,
};
struct mtk_i2c_compatible {
@@ -136,6 +138,7 @@ struct mtk_i2c_compatible {
unsigned char auto_restart: 1;
unsigned char aux_len_reg: 1;
unsigned char support_33bits: 1;
+ unsigned char timing_adjust: 1;
};
struct mtk_i2c {
@@ -176,6 +179,15 @@ struct mtk_i2c {
.max_num_msgs = 255,
};
+static const struct mtk_i2c_compatible mt2712_compat = {
+ .pmic_i2c = 0,
+ .dcm = 1,
+ .auto_restart = 1,
+ .aux_len_reg = 1,
+ .support_33bits = 1,
+ .timing_adjust = 1,
+};
+
static const struct mtk_i2c_compatible mt6577_compat = {
.quirks = &mt6577_i2c_quirks,
.pmic_i2c = 0,
@@ -183,6 +195,7 @@ struct mtk_i2c {
.auto_restart = 0,
.aux_len_reg = 0,
.support_33bits = 0,
+ .timing_adjust = 0,
};
static const struct mtk_i2c_compatible mt6589_compat = {
@@ -192,6 +205,7 @@ struct mtk_i2c {
.auto_restart = 0,
.aux_len_reg = 0,
.support_33bits = 0,
+ .timing_adjust = 0,
};
static const struct mtk_i2c_compatible mt7622_compat = {
@@ -201,6 +215,7 @@ struct mtk_i2c {
.auto_restart = 1,
.aux_len_reg = 1,
.support_33bits = 0,
+ .timing_adjust = 0,
};
static const struct mtk_i2c_compatible mt8173_compat = {
@@ -209,9 +224,11 @@ struct mtk_i2c {
.auto_restart = 1,
.aux_len_reg = 1,
.support_33bits = 1,
+ .timing_adjust = 0,
};
static const struct of_device_id mtk_i2c_of_match[] = {
+ { .compatible = "mediatek,mt2712-i2c", .data = &mt2712_compat },
{ .compatible = "mediatek,mt6577-i2c", .data = &mt6577_compat },
{ .compatible = "mediatek,mt6589-i2c", .data = &mt6589_compat },
{ .compatible = "mediatek,mt7622-i2c", .data = &mt7622_compat },
@@ -271,6 +288,9 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
if (i2c->dev_comp->dcm)
writew(I2C_DCM_DISABLE, i2c->base + OFFSET_DCM_EN);
+ if (i2c->dev_comp->timing_adjust)
+ writew(I2C_DEFAULT_CLK_DIV - 1, i2c->base + OFFSET_CLOCK_DIV);
+
writew(i2c->timing_reg, i2c->base + OFFSET_TIMING);
writew(i2c->high_speed_reg, i2c->base + OFFSET_HS);
@@ -725,10 +745,6 @@ static int mtk_i2c_probe(struct platform_device *pdev)
if (!i2c)
return -ENOMEM;
- ret = mtk_i2c_parse_dt(pdev->dev.of_node, i2c);
- if (ret)
- return -EINVAL;
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
i2c->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(i2c->base))
@@ -759,6 +775,13 @@ static int mtk_i2c_probe(struct platform_device *pdev)
i2c->adap.timeout = 2 * HZ;
i2c->adap.retries = 1;
+ ret = mtk_i2c_parse_dt(pdev->dev.of_node, i2c);
+ if (ret)
+ return -EINVAL;
+
+ if (i2c->dev_comp->timing_adjust)
+ i2c->clk_src_div *= I2C_DEFAULT_CLK_DIV;
+
if (i2c->have_pmic && !i2c->dev_comp->pmic_i2c)
return -EINVAL;
--
1.8.1.1
More information about the linux-arm-kernel
mailing list