[PATCH V4 02/26] powerpc/PCI: deprecate pci_get_bus_and_slot()

Sinan Kaya okaya at codeaurora.org
Mon Dec 18 21:37:38 PST 2017


pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.

Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().

Use pci_get_domain_bus_and_slot() with a domain number of 0 as the code
is not ready to consume multiple domains and existing code used domain
number 0.

Signed-off-by: Sinan Kaya <okaya at codeaurora.org>
---
 arch/powerpc/kernel/pci_32.c              | 3 ++-
 arch/powerpc/platforms/powermac/feature.c | 2 +-
 arch/powerpc/sysdev/mv64x60_pci.c         | 4 ++--
 3 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index 1d817f4..85ad2f7 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -96,7 +96,8 @@
 		reg = of_get_property(node, "reg", NULL);
 		if (!reg)
 			continue;
-		dev = pci_get_bus_and_slot(pci_bus, ((reg[0] >> 8) & 0xff));
+		dev = pci_get_domain_bus_and_slot(0, pci_bus,
+						  ((reg[0] >> 8) & 0xff));
 		if (!dev || !dev->subordinate) {
 			pci_dev_put(dev);
 			continue;
diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c
index 466b842..3f82cb2 100644
--- a/arch/powerpc/platforms/powermac/feature.c
+++ b/arch/powerpc/platforms/powermac/feature.c
@@ -829,7 +829,7 @@ static long core99_scc_enable(struct device_node *node, long param, long value)
 
 	if (value) {
 		if (pci_device_from_OF_node(node, &pbus, &pid) == 0)
-			pdev = pci_get_bus_and_slot(pbus, pid);
+			pdev = pci_get_domain_bus_and_slot(0, pbus, pid);
 		if (pdev == NULL)
 			return 0;
 		rc = pci_enable_device(pdev);
diff --git a/arch/powerpc/sysdev/mv64x60_pci.c b/arch/powerpc/sysdev/mv64x60_pci.c
index d52b3b8..6fe9104 100644
--- a/arch/powerpc/sysdev/mv64x60_pci.c
+++ b/arch/powerpc/sysdev/mv64x60_pci.c
@@ -37,7 +37,7 @@ static ssize_t mv64x60_hs_reg_read(struct file *filp, struct kobject *kobj,
 	if (count < MV64X60_VAL_LEN_MAX)
 		return -EINVAL;
 
-	phb = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
+	phb = pci_get_domain_bus_and_slot(0, 0, PCI_DEVFN(0, 0));
 	if (!phb)
 		return -ENODEV;
 	pci_read_config_dword(phb, MV64X60_PCICFG_CPCI_HOTSWAP, &v);
@@ -61,7 +61,7 @@ static ssize_t mv64x60_hs_reg_write(struct file *filp, struct kobject *kobj,
 	if (sscanf(buf, "%i", &v) != 1)
 		return -EINVAL;
 
-	phb = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
+	phb = pci_get_domain_bus_and_slot(0, 0, PCI_DEVFN(0, 0));
 	if (!phb)
 		return -ENODEV;
 	pci_write_config_dword(phb, MV64X60_PCICFG_CPCI_HOTSWAP, v);
-- 
1.9.1




More information about the linux-arm-kernel mailing list