[PATCH v4 12/12] ARM64: dts: marvell: Add thermal support for A7K/A8K

[Gregory CLEMENT]

Hi Miquel,
 
 On lun., déc. 18 2017, Miquel Raynal <miquel.raynal at free-electrons.com> wrote:

> Add thermal DT nodes in AP806 and CP110 master/slave DTSI files.
>
> Suggested-by: David Sniatkiwicz <davidsn at marvell.com>
> Signed-off-by: Miquel Raynal <miquel.raynal at free-electrons.com>

Applied on mvebu/dt64 (but not yet in linux-next)

Thanks,

Gregory

> ---
>  arch/arm64/boot/dts/marvell/armada-ap806.dtsi        | 6 ++++++
>  arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 6 ++++++
>  arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi  | 6 ++++++
>  3 files changed, 18 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> index 1c4dd8ab9ad5..bbc5a4d3acac 100644
> --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
> @@ -285,6 +285,12 @@
>  					gpio-ranges = <&ap_pinctrl 0 0 20>;
>  				};
>  			};
> +
> +			ap_thermal: thermal at 6f808C {
> +				compatible = "marvell,armada-ap806-thermal";
> +				reg = <0x6f808C 0x4>,
> +				      <0x6f8084 0x8>;
> +			};
>  		};
>  	};
>  };
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> index e3b64d03fbd8..ecbc76d26dff 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> @@ -182,6 +182,12 @@
>  				interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
>  			};
>  
> +			cpm_thermal: thermal at 400078 {
> +				compatible = "marvell,armada-cp110-thermal";
> +				reg = <0x400078 0x4>,
> +				      <0x400070 0x8>;
> +			};
> +
>  			cpm_syscon0: system-controller at 440000 {
>  				compatible = "syscon", "simple-mfd";
>  				reg = <0x440000 0x2000>;
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
> index 0d51096c69f8..29ba32c68870 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
> @@ -182,6 +182,12 @@
>  				interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
>  			};
>  
> +			cps_thermal: thermal at 400078 {
> +				compatible = "marvell,armada-cp110-thermal";
> +				reg = <0x400078 0x4>,
> +				      <0x400070 0x8>;
> +			};
> +
>  			cps_syscon0: system-controller at 440000 {
>  				compatible = "syscon", "simple-mfd";
>  				reg = <0x440000 0x2000>;
> -- 
> 2.11.0
>

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com