[PATCH v4 01/12] dt-bindings: thermal: Describe Armada AP806 and CP110

[Miquel Raynal]

From: Baruch Siach <baruch at tkos.co.il>

Add compatible strings for AP806 and CP110 that are part of the Armada
8k/7k line of SoCs.

Add a note on the differences in the size of the control area in
different bindings. This is an existing difference between the Armada
375 binding and the other boards already supported. The new AP806 and
CP110 bindings are similar to the existing Armada 375 in this regard.

Signed-off-by: Baruch Siach <baruch at tkos.co.il>
[<miquel.raynal at free-electrons.com>: reword, additional details]
Signed-off-by: Miquel Raynal <miquel.raynal at free-electrons.com>
---
 .../devicetree/bindings/thermal/armada-thermal.txt | 24 +++++++++++++++++-----
 1 file changed, 19 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/armada-thermal.txt b/Documentation/devicetree/bindings/thermal/armada-thermal.txt
index 24aacf8948c5..9b7b2c03cc6f 100644
--- a/Documentation/devicetree/bindings/thermal/armada-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/armada-thermal.txt
@@ -7,17 +7,31 @@ Required properties:
 		marvell,armada375-thermal
 		marvell,armada380-thermal
 		marvell,armadaxp-thermal
+		marvell,armada-ap806-thermal
+		marvell,armada-cp110-thermal
 
 - reg:		Device's register space.
 		Two entries are expected, see the examples below.
-		The first one is required for the sensor register;
-		the second one is required for the control register
-		to be used for sensor initialization (a.k.a. calibration).
+		The first one points to the status register (4B).
+		The second one points to the control registers (8B).
+		Note: with legacy bindings, the second entry pointed
+		only to the so called "control MSB" ("control 1"), was
+		4B wide and did not let the possibility to reach the
+		"control LSB" ("control 0") register. This is only
+		allowed for compatibility reasons in Armada
+		370/375/38x/XP DT nodes.
 
-Example:
+Examples:
 
+	/* Legacy bindings */
 	thermal at d0018300 {
 		compatible = "marvell,armada370-thermal";
-                reg = <0xd0018300 0x4
+		reg = <0xd0018300 0x4
 		       0xd0018304 0x4>;
 	};
+
+	ap_thermal: thermal at 6f8084 {
+		compatible = "marvell,armada-ap806-thermal";
+		reg = <0x6f808C 0x4>,
+		      <0x6f8084 0x8>;
+	};
-- 
2.11.0