[PATCH 3/4 v5] drm/bridge: Add timing support to dumb VGA DAC

Laurent Pinchart laurent.pinchart at ideasonboard.com
Mon Dec 18 02:51:11 PST 2017


Hi Linus,

Thank you for the patch.

On Friday, 15 December 2017 14:10:46 EET Linus Walleij wrote:
> This extends the dumb VGA DAC bridge to handle the THS8134A
> and THS8134B VGA DACs in addition to those already handled.
> 
> We assign the proper timing data to the pointer inside the
> bridge struct so display controllers that need to align their
> timings to the bridge can pick it up and work from there.
> 
> Cc: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
> Cc: Bartosz Golaszewski <bgolaszewski at baylibre.com>
> Cc: Maxime Ripard <maxime.ripard at free-electrons.com>
> Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
> ---
> ChangeLog v4->v5:
> - Rewrite the support using the new concept of defining
>   fine-granular sampling (setup+hold) timing definitions
>   stored in the bridge timings struct.
> ChangeLog v3->v4:
> - Actually have the code syntactically correct and compiling :(
>   (Kconfig mistake.)
>   (...)
>   AS      usr/initramfs_data.o
>   AR      usr/built-in.o
>   CC      drivers/gpu/drm/bridge/dumb-vga-dac.o
>   AR      drivers/gpu/drm/bridge/built-in.o
>   AR      drivers/gpu/drm/built-in.o
>   AR      drivers/gpu/built-in.o
>   AR      drivers/built-in.o
>   (...)
> ChangeLog v2->v3:
> - Move const specifier.
> - Cut one line of code assigning bus flags.
> - Preserve the "ti,ths8135" compatible for elder device trees.
> ChangeLog v1->v2:
> - Alphabetize includes
> - Use a u32 with the bus polarity flags and just encode the
>   polarity using the DRM define directly.
> - Rename vendor_data to vendor_info.
> - Simplify assignment of the flag as it is just a simple
>   u32 now.
> - Probe all TI variants on the "ti,ths813x" wildcard for now,
>   we only need to know that the device is in this family to
>   set the clock edge flag right.
> ---
>  drivers/gpu/drm/bridge/dumb-vga-dac.c | 61 ++++++++++++++++++++++++++++++--
>  1 file changed, 58 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/dumb-vga-dac.c
> b/drivers/gpu/drm/bridge/dumb-vga-dac.c index de5e7dee7ad6..34788783a90f
> 100644
> --- a/drivers/gpu/drm/bridge/dumb-vga-dac.c
> +++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c
> @@ -11,6 +11,7 @@
>   */
> 
>  #include <linux/module.h>
> +#include <linux/of_device.h>
>  #include <linux/of_graph.h>
>  #include <linux/regulator/consumer.h>
> 
> @@ -176,11 +177,13 @@ static struct i2c_adapter
> *dumb_vga_retrieve_ddc(struct device *dev) static int dumb_vga_probe(struct
> platform_device *pdev)
>  {
>  	struct dumb_vga *vga;
> +	const struct drm_bridge_timings *timings;
> 
>  	vga = devm_kzalloc(&pdev->dev, sizeof(*vga), GFP_KERNEL);
>  	if (!vga)
>  		return -ENOMEM;
>  	platform_set_drvdata(pdev, vga);
> +	timings = of_device_get_match_data(&pdev->dev);
> 
>  	vga->vdd = devm_regulator_get_optional(&pdev->dev, "vdd");
>  	if (IS_ERR(vga->vdd)) {
> @@ -204,6 +207,7 @@ static int dumb_vga_probe(struct platform_device *pdev)
> 
>  	vga->bridge.funcs = &dumb_vga_bridge_funcs;
>  	vga->bridge.of_node = pdev->dev.of_node;
> +	vga->bridge.timings = timings;

Do you need the intermediate timings variable ?

>  	drm_bridge_add(&vga->bridge);
> 
> @@ -222,10 +226,61 @@ static int dumb_vga_remove(struct platform_device
> *pdev) return 0;
>  }
> 
> +/*
> + * We assume the ADV7123 DAC is the "default" for historical reasons
> + * Information taken from the ADV7123 datasheet, revision D.
> + * NOTE: the ADV7123EP seems to have other timings and need a new timings
> + * set if used.
> + */
> +static const struct drm_bridge_timings default_dac_timings = {
> +	/* Timing specifications, datasheet page 7 */
> +	.sampling_edge = true,
> +	.setup_time_ps = 500,
> +	.hold_time_ps = 1500,
> +};

You know what's lovely ? The setup time depends on the power supply voltage 
:-) Let's use 500ps for now, that's a conservative value that will work for 
both 5V and 3.3V. If anyone needs to lower it to 200ps later, they can always 
implement support for voltage-dependent timings.

> +/*
> + * Information taken from the THS8134, THS8134A, THS8134B datasheet named
> + * "SLVS205D", dated May 1990, revised March 2000.
> + */
> +static const struct drm_bridge_timings ti_ths8134_dac_timings = {
> +	/* From timing diagram, datasheet page 9 */
> +	.sampling_edge = true,
> +	/* From datasheet, page 12 */
> +	.setup_time_ps = 3000,
> +	/* I guess this means latched input */
> +	.hold_time_ps = 0,
> +};
> +
> +/*
> + * Information taken from the THS8135 datasheet named "SLAS343B", dated
> + * May 2001, revised April 2013.
> + */
> +static const struct drm_bridge_timings ti_ths8135_dac_timings = {
> +	/* From timing diagram, datasheet page 14 */
> +	.sampling_edge = true,
> +	/* From datasheet, page 16 */
> +	.setup_time_ps = 2000,
> +	.hold_time_ps = 500,
> +};
> +
>  static const struct of_device_id dumb_vga_match[] = {
> -	{ .compatible = "dumb-vga-dac" },
> -	{ .compatible = "adi,adv7123" },
> -	{ .compatible = "ti,ths8135" },
> +	{
> +		.compatible = "dumb-vga-dac",
> +		.data = &default_dac_timings,

Shouldn't we leave this NULL for dumb VGA DACs ? They're made of passive 
components and don't sample the signal, so there's no real timings that we can 
report.

Apart from that,

Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

> +	},
> +	{
> +		.compatible = "adi,adv7123",
> +		.data = &default_dac_timings,
> +	},
> +	{
> +		.compatible = "ti,ths8135",
> +		.data = &ti_ths8135_dac_timings,
> +	},
> +	{
> +		.compatible = "ti,ths8134",
> +		.data = &ti_ths8134_dac_timings,
> +	},
>  	{},
>  };
>  MODULE_DEVICE_TABLE(of, dumb_vga_match);


-- 
Regards,

Laurent Pinchart




More information about the linux-arm-kernel mailing list