[linux-sunxi] [PATCH v3 2/3] dt-bindings: media: Add Allwinner V3s Camera Sensor Interface (CSI)

[Maxime Ripard]

Hi,

On Mon, Dec 18, 2017 at 04:49:21PM +0800, Yong wrote:
> > > +               compatible = "allwinner,sun8i-v3s-csi";
> > > +               reg = <0x01cb4000 0x1000>;
> > > +               interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
> > > +               clocks = <&ccu CLK_BUS_CSI>,
> > > +                        <&ccu CLK_CSI1_SCLK>,
> > 
> > CSI also has an MCLK. Do you need that one?
> 
> MCLK is not needed if the front end is not a sensor (like adv7611).
> I will add it as an option.

I guess this should always be needed then. And the driver will make
the decision to enable it or not.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20171218/010dbb66/attachment-0001.sig>