[PATCH 2/9] ARM: dts: imx7-colibri: make sure multiplexed pins are not active

[Stefan Agner]

On 2017-12-16 15:01, Fabio Estevam wrote:
> On Wed, Dec 6, 2017 at 1:29 PM, Stefan Agner <stefan at agner.ch> wrote:
>> The Colibri pins PWM<A> and <D> are multiplexed on the module, make
>> sure the secondary SoC pin is not active.
>>
>> Signed-off-by: Stefan Agner <stefan at agner.ch>
> 
> I haven't really understood the commit message, but this is probably
> because I don't have access to the schematics.

It means that the modules pins are connected to two SoC pads. It is also
mentioned in the Colibri iMX7 datasheet.

This allows to use the module pin for a different purpose, but we mux it
such that it is usable for the primary purpose (which is PWM).

> 
> Anyway:
> 
> Reviewed-by: Fabio Estevam <fabio.estevam at nxp.com>

Thanks!

--
Stefan