[PATCH v2] arm: imx: dts: Remove leading 0x and 0s from bindings notation

[Mathieu Malaterre]

Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:

Warning (unit_address_format): Node /XXX unit name should not have leading "0x"

and

Warning (unit_address_format): Node /XXX unit name should not have leading 0s

Converted using the following command:

find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C

For simplicity, two sed expressions were used to solve each warnings separately.

To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:

https://elinux.org/Device_Tree_Linux#Linux_conventions

This will solve as a side effect warning:

Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"

This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")

Reported-by: David Daney <ddaney at caviumnetworks.com>
Suggested-by: Rob Herring <robh at kernel.org>
Signed-off-by: Mathieu Malaterre <malat at debian.org>
---
v2: Remove invalid patch for imx7s.dtsi, remove duplicate patch for imx7d.dtsi

 arch/arm/boot/dts/imx6q-display5.dtsi | 2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/boot/dts/imx6q-display5.dtsi b/arch/arm/boot/dts/imx6q-display5.dtsi
index 4084de43d4d9..09085fde3341 100644
--- a/arch/arm/boot/dts/imx6q-display5.dtsi
+++ b/arch/arm/boot/dts/imx6q-display5.dtsi
@@ -255,7 +255,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	codec: tfa9879 at 6C {
+	codec: tfa9879 at 6c {
 		#sound-dai-cells = <0>;
 		compatible = "nxp,tfa9879";
 		reg = <0x6C>;
-- 
2.11.0