[PATCH] ARM: dts: am43xx: Fix inverted DS0_PULL_UP_DOWN_EN macro

[Tony Lindgren]

* Dave Gerlach <d-gerlach at ti.com> [171213 13:27]:
> Due to a mistake in documentation the DS0_PULL_UP_DOWN_EN macro was
> mistakenly defined as an active high bit, however setting the bit
> actually disables the internal pull resistor on the pin, so correct this
> macro and introduce a new DS0_PULL_UP_DOWN_DIS macro with the proper bit
> value set now that the documentation has been updated.
> 
> Change based on AM437x Techninal Reference Manual SPRUHL7G Revised June
> 2017 Section 7.2.1.

Applying into omap-for-v4.16/dt thanks,

Tony