[PATCH v5 05/13] arm64: Unconditionally enable IESB on exception entry/return for firmware-first

[James Morse]

ARM v8.2 has a feature to add implicit error synchronization barriers
whenever the CPU enters or returns from an exception level. Add this to the
features we always enable. CPUs that don't support this feature will treat
the bit as RES0.

This feature causes RAS errors that are not yet visible to software to
become pending SErrors. We expect to have firmware-first RAS support
so synchronised RAS errors will be take immediately to EL3.
Any system without firmware-first handling of errors will take the SError
either immediatly after exception return, or when we unmask SError after
entry.S's work.

Adding IESB to the ELx flags causes it to be enabled by KVM and kexec
too.

Platform level RAS support may require additional firmware support.

Cc: Christoffer Dall <christoffer.dall at linaro.org>
Cc: Marc Zyngier <marc.zyngier at arm.com>
Suggested-by: Will Deacon <will.deacon at arm.com>
Link: https://www.spinics.net/lists/kvm-arm/msg28192.html
Signed-off-by: James Morse <james.morse at arm.com>
---
Changes since v4:
 * Unconditionally enabled in SCTLR_ELx, (so a rewrite)
 * Dropped Catalin's Reviewed-by.

Changes since v3:
 * removed IESB Kconfig option

 arch/arm64/include/asm/sysreg.h | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index 2eca9e2368d9..7a55fe0c07be 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -399,6 +399,7 @@
 
 /* Common SCTLR_ELx flags. */
 #define SCTLR_ELx_EE    (1 << 25)
+#define SCTLR_ELx_IESB	(1 << 21)
 #define SCTLR_ELx_WXN	(1 << 19)
 #define SCTLR_ELx_I	(1 << 12)
 #define SCTLR_ELx_SA	(1 << 3)
@@ -406,8 +407,8 @@
 #define SCTLR_ELx_A	(1 << 1)
 #define SCTLR_ELx_M	1
 
-#define SCTLR_ELx_FLAGS	(SCTLR_ELx_M | SCTLR_ELx_A | SCTLR_ELx_C | \
-			 SCTLR_ELx_SA | SCTLR_ELx_I)
+#define SCTLR_ELx_FLAGS	(SCTLR_ELx_M  | SCTLR_ELx_A | SCTLR_ELx_C | \
+			 SCTLR_ELx_SA | SCTLR_ELx_I | SCTLR_ELx_IESB)
 
 /* SCTLR_EL2 specific flags. */
 #define SCTLR_EL2_RES1	((1 << 4)  | (1 << 5)  | (1 << 11) | (1 << 16) | \
@@ -415,8 +416,8 @@
 			 (1 << 29))
 #define SCTLR_EL2_RES0	((1 << 6)  | (1 << 7)  | (1 << 8)  | (1 << 9)  | \
 			 (1 << 10) | (1 << 13) | (1 << 14) | (1 << 15) | \
-			 (1 << 17) | (1 << 20) | (1 << 21) | (1 << 24) | \
-			 (1 << 26) | (1 << 27) | (1 << 30) | (1 << 31))
+			 (1 << 17) | (1 << 20) | (1 << 24) | (1 << 26) | \
+			 (1 << 27) | (1 << 30) | (1 << 31))
 
 #ifdef CONFIG_CPU_BIG_ENDIAN
 #define ENDIAN_SET_EL2		SCTLR_ELx_EE
@@ -427,7 +428,7 @@
 #endif
 
 /* SCTLR_EL2 value used for the hyp-stub */
-#define SCTLR_EL2_SET	(ENDIAN_SET_EL2   | SCTLR_EL2_RES1)
+#define SCTLR_EL2_SET	(SCTLR_ELx_IESB   | ENDIAN_SET_EL2   | SCTLR_EL2_RES1)
 #define SCTLR_EL2_CLEAR	(SCTLR_ELx_M      | SCTLR_ELx_A    | SCTLR_ELx_C   | \
 			 SCTLR_ELx_SA     | SCTLR_ELx_I    | SCTLR_ELx_WXN | \
 			 ENDIAN_CLEAR_EL2 | SCTLR_EL2_RES0)
@@ -453,7 +454,7 @@
 #define SCTLR_EL1_RES1	((1 << 11) | (1 << 20) | (1 << 22) | (1 << 28) | \
 			 (1 << 29))
 #define SCTLR_EL1_RES0  ((1 << 6)  | (1 << 10) | (1 << 13) | (1 << 17) | \
-			 (1 << 21) | (1 << 27) | (1 << 30) | (1 << 31))
+			 (1 << 27) | (1 << 30) | (1 << 31))
 
 #ifdef CONFIG_CPU_BIG_ENDIAN
 #define ENDIAN_SET_EL1		(SCTLR_EL1_E0E | SCTLR_ELx_EE)
@@ -466,8 +467,8 @@
 #define SCTLR_EL1_SET	(SCTLR_ELx_M    | SCTLR_ELx_C    | SCTLR_ELx_SA   |\
 			 SCTLR_EL1_SA0  | SCTLR_EL1_SED  | SCTLR_ELx_I    |\
 			 SCTLR_EL1_DZE  | SCTLR_EL1_UCT  | SCTLR_EL1_NTWI |\
-			 SCTLR_EL1_NTWE | SCTLR_EL1_SPAN | ENDIAN_SET_EL1 |\
-			 SCTLR_EL1_UCI  | SCTLR_EL1_RES1)
+			 SCTLR_EL1_NTWE | SCTLR_ELx_IESB | SCTLR_EL1_SPAN |\
+			 ENDIAN_SET_EL1 | SCTLR_EL1_UCI  | SCTLR_EL1_RES1)
 #define SCTLR_EL1_CLEAR	(SCTLR_ELx_A   | SCTLR_EL1_CP15BEN | SCTLR_EL1_ITD    |\
 			 SCTLR_EL1_UMA | SCTLR_ELx_WXN     | ENDIAN_CLEAR_EL1 |\
 			 SCTLR_EL1_RES0)
-- 
2.15.0